a30-4521
Fig. 10 — Unbolt Portion Between Flex Connector and Cooler
(30XA140, 160: Circuit A and 30XA180-350: All Circuits)
ASME B16.9 | EXISTING FLANGE | |
ON FLEX | ||
STEEL STUB END | ||
CONNECTOR AT | ||
30XA BASE UNIT | ||
|
PIPE FLANGE
SEE TABLE 6)MOUNTING
BRACKET
Fig. 11 — Connect Steel Suction Line at the 30XA
Base Unit (Shown) and Cooler
(30XA140, 160: Circuit A and
30XA180-350: All Circuits)
22.5°
45.0°
| ||
8 HOLES 1 (25) | 1 EXTRA HOLE M16 | |
| ||
EQUALLY SPACED | ||
|
NOTES:
1.Measurements are shown in inches (millimeters).
2.
3.
4.The extra hole allows a bolt to slide through and mount the flanges and gaskets of the suction line on a mounting bracket at the 30XA base unit. See Fig. 10 and 11.
Fig. 12 — Flange and Gasket Mounting Locations
15