Carrier 33CS2PPRH-01, 33CS2PP2S-01 owner manual Daily Schedule Planner, DAY Schedule, Week

3.The arrow will be pointing to “occ” on the screen. To set the occ period start time, press the soft button under the hour or minute indictor and then press the up or down buttons to change the time.

4.Set the heating temperature set point for that time period by pressing the soft button under the heat set point tem- perature. Press the up or down buttons until the desired heating temperature is shown.

5.Set the cooling temperature set point for that time period by pressing the soft button under the cool set point tem- perature. Press the up or down buttons until the desired cooling temperature is shown.

6.Repeat this process for each of the three remaining time periods (occ2, occ3, and unocc) by first pressing the soft button under the time period to select it with the arrow. Then use the soft keys to change the start time, the heat- ing set point, and the cooling set point.

7.Press the done button when complete.

8.Close the thermostat door.

To set up a schedule where all days of the week will not fol- low the same schedule, perform the following:

1.Fill in Table 2 with the desired times and set points for each day. Use this table as a guide during programming and for future reference.

2.Open the thermostat door.

3.Press the set button until the screen displays “daily sched- ule” in the center of the screen. The list of the days of the week are displayed on the left.

4.There will be arrows next to each day. This indicates that all seven days will be programmed the same way. Press the soft button under the days of the week until the arrow is next to the day that will be programmed.

5.The arrow will be pointing to “occ” on the screen. To set the occ period start time, press the soft button under the hour or minute indicator and then press the up or down buttons to change the time.

6.Set the heating temperature set point for that time period by pressing the soft button under the heat set point tem- perature. Press the up or down buttons until the desired heating temperature is shown.

7.Set the cooling temperature set point for that time period by pressing the soft button under the cool set point tem- perature. Press the up or down buttons until the desired cooling temperature is shown.

8.Repeat this process for each of the three remaining time periods (occ2, occ3, and unocc) by first pressing the soft button under the time period to select it with the arrow.

Then use the soft keys to change the start time, the heat- ing set point, and the cooling set point.

9.Press the soft button under the days of the week until the arrow is pointing to the next day that will be pro- grammed.

10.Repeat Steps 5 to 8 to program the current day.

11.Repeat this process until all the days have been pro- grammed.

12.Press the done button when complete.

13.Close the thermostat door.

Programming a Holiday Schedule — The user can program a special heating and cooling schedule to follow during holidays or extended absences. To program the holiday schedule, perform the following:

1.Open the thermostat door.

2.Press the set button until the screen displays the holiday settings.

3.Set the heating temperature set point for the holiday by pressing the soft button under the heat set point tempera- ture. Press the up or down buttons until the desired heat- ing temperature is shown.

4.Set the cooling temperature set point for the holiday by pressing the soft button under the cool set point tempera- ture. Press the up or down buttons until the desired cool- ing temperature is shown.

5.Set the humidity set point for the holiday by pressing the soft button under the humidify icon. Press the up or down buttons until the desired humidity is shown.

NOTE: A humidify icon will only be shown for 33CS2PPRH thermostats.

6.Set the mode for the thermostat during the holiday by pressing the mode button. Press the mode button until the arrow is pointing to the desired mode.

7.Press the done button when complete.

8.Close the thermostat door.

Activating the Holiday Program — The user must schedule a return date to activate the holiday settings before leaving. The thermostat will begin following the holiday schedule after the return date has been selected. On 12:00 AM of the return date, the thermostat will automatically switch to the programmed schedule.

To activate the holiday program, perform the following:

1.Press the schedule button until the arrow is next to “holi- day.”

2.The next day’s date will be displayed at the bottom of the screen under the words “return on.” There will be a box

Table 2 — Daily Schedule Planner

DAY				SCHEDULE
OF THE		Occ		Occ2		Occ3	Unocc
WEEK
	Start Time / Heat / Cool		Start Time / Heat / Cool		Start Time / Heat / Cool		Start Time / Heat / Cool
Monday	/	/	/	/	/	/	/	/
Tuesday	/	/	/	/	/	/	/	/
Wednesday	/	/	/	/	/	/	/	/
Thursday	/	/	/	/	/	/	/	/
Friday	/	/	/	/	/	/	/	/
Saturday	/	/	/	/	/	/	/	/
Sunday	/	/	/	/	/	/	/	/

NOTE: The cooling temperature set point must be higher than the heating temperature set point. (The temperature difference may be changed in the advanced set up configuration by the installer.)

3