Carrier 38APD025-100, 38APS025-050 38APS Standard Condenser Fan Electrical Data

Table 9 — 38APS Standard Condenser Fan Electrical Data

38APS UNIT		SUPPLY			COMPRESSOR			CONDENSER FAN				REC
	V-Ph-Hz	VOLTAGE								MCA	MOCP		ICF
SIZE		Min	Max	Qty		RLA	LRA	Total Qty	FLA			FUSE
	208/230-3-60	187	254			48.1	245		6.6	121.4	150	150	306.3
025	380-3-60	342	418			23.7	145		3.9	61.1	80	70	176.5
	460-3-60	414	506	2		18.6	125	2	3.3	48.5	60	60	150.2
	575-3-60	518	632			14.7	100		2.6	38.3	50	45	119.9
	380/415-3-50	342	440			18.6	118		3.3	48.5	60	60	143.2
	208/230-3-60	187	254			51.3	300		6.6	128.6	175	150	364.5
027	380-3-60	342	418			26.9	139		3.9	68.3	90	80	173.7
	460-3-60	414	506	2		23.1	150	2	3.3	58.6	80	70	179.7
	575-3-60	518	632			19.9	109		2.6	50.0	60	60	134.1
	380/415-3-50	342	440			23.1	140		3.3	58.6	80	70	169.7
	208/230-3-60	187	254			55.8	340		6.6	138.8	175	175	409.0
030	380-3-60	342	418			34.0	196		3.9	84.3	110	100	237.8
	460-3-60	414	506	2		26.9	179	2	3.3	67.1	90	80	212.5
	575-3-60	518	632			23.7	132		2.6	58.5	80	70	160.9
	380/415-3-50	342	440			26.9	174		3.3	67.1	90	80	207.5
	208/230-3-60	187	254			51.3	300		6.6	186.5	225	200	422.4
040	380-3-60	342	418			26.9	139		3.9	99.1	125	110	204.5
	460-3-60	414	506	3		23.1	150	3	3.3	85.0	100	100	206.1
	575-3-60	518	632			19.9	109		2.6	72.5	90	80	156.6
	380/415-3-50	342	440			23.1	140		3.3	85.0	100	100	196.1
	208/230-3-60	187	254			55.8	340		6.6	201.2	250	225	471.4
050	380-3-60	342	418			34.0	196		3.9	122.2	150	150	275.7
	460-3-60	414	506	3		26.9	179	3	3.3	97.3	110	110	242.7
	575-3-60	518	632			23.7	132		2.6	84.8	100	100	187.2
	380/415-3-50	342	440			26.9	174		3.3	97.3	110	110	237.7

Table 10 — 38APS Low Sound Condenser Fan Electrical Data

38APS UNIT		SUPPLY			COMPRESSOR			CONDENSER FAN				REC
	V-Ph-Hz	VOLTAGE								MCA	MOCP		ICF
SIZE		Min	Max	Qty		RLA	LRA	Total Qty	FLA			FUSE
	208/230-3-60	187	254			48.1	245		6.0	120.2	150	150	305.1
025	380-3-60	342	418			23.7	145		3.9	61.1	80	70	176.5
	460-3-60	414	506	2		18.6	125	2	2.9	47.7	60	60	149.4
	575-3-60	518	632			14.7	100		2.4	37.9	50	45	119.5
	380/415-3-50	342	440			18.6	118		2.9	47.7	60	60	142.4
	208/230-3-60	187	254			51.3	300		6.0	127.4	175	150	363.3
027	380-3-60	342	418			26.9	139		3.9	68.3	90	80	173.7
	460-3-60	414	506	2		23.1	150	2	2.9	57.8	80	70	178.9
	575-3-60	518	632			19.9	109		2.4	49.6	60	60	133.7
	380/415-3-50	342	440			23.1	140		2.9	57.8	80	70	168.9
	208/230-3-60	187	254			55.8	340		6.0	137.6	175	175	407.8
030	380-3-60	342	418			34.0	196		3.9	84.3	110	100	237.8
	460-3-60	414	506	2		26.9	179	2	2.9	66.3	90	80	211.7
	575-3-60	518	632			23.7	132		2.4	58.1	80	70	160.5
	380/415-3-50	342	440			26.9	174		2.9	66.3	90	80	206.7
	208/230-3-60	187	254			51.3	300		6.0	184.7	225	200	420.6
040	380-3-60	342	418			26.9	139		3.9	99.1	125	110	204.5
	460-3-60	414	506	3		23.1	150	3	2.9	83.8	100	100	204.9
	575-3-60	518	632			19.9	109		2.4	71.9	90	80	156.0
	380/415-3-50	342	440			23.1	140		2.9	83.8	100	100	194.9
	208/230-3-60	187	254			55.8	340		6.0	199.4	250	225	469.6
050	380-3-60	342	418			34.0	196		3.9	122.2	150	150	275.7
	460-3-60	414	506	3		26.9	179	3	2.9	96.1	110	110	241.5
	575-3-60	518	632			23.7	132		2.4	84.2	100	100	186.6
	380/415-3-50	342	440			26.9	174		2.9	96.1	110	110	236.5

		LEGEND
FLA	—	Full Load Amps
ICF	—	Maximum Instantaneous Current Flow
LRA	—	Locked Rotor Amps
MCA	—	Minimum Circuit Amps
MOCP —		Maximum Overcurrent Protection
RLA	—	Rated Load Amps

NOTES:

1.Units are suitable for use on electrical systems where voltage supplied to the unit terminals is not below or above the listed minimum and maximum limits. Maximum allowable phase imbalance is: voltage 2%; amps 10%.

2.All units or modules have single point primary power connection. Main power must be supplied from a field-supplied disconnect.

3.For MCA that is less than or equal to 380 amps, 3 conductors are required.

For MCA between 381 and 760 amps, 6 conductors are required. Calculation of conductors required is based on 75 C copper wire.

4.Wiring for main field supply must be rated 75 C. Use copper conductors only.

a.Incoming wire size range for terminal block with MCA up to 175 amps is 14 AWG (American Wire Gage) to 2/0.

b. Incoming wire size range for terminal block with MCA from 175.1 amps to 420 amps is 2 AWG to 600 kcmil.

c. Incoming wire size range for non-fused disconnect with MCA up to 100 amps is 14 AWG to 1/0.

d. Incoming wire size range for non-fused disconnect with MCA from

100.1amp to 200 amps is 6 AWG to 350 kcmil.

e. Incoming wire size range for non-fused disconnect with MCA from

200.1amp to 450 amps is 3/0 to 500 kcmil.

31