Carrier 38APS025-050, 38APD025-100 38APD Standard Condenser Fan Electrical Data, Rla

Table 11 — 38APD Standard Condenser Fan Electrical Data

38APD		SUPPLY				COMPRESSOR					CONDENSER FAN				REC
UNIT	V-Ph-Hz	VOLTAGE		CIRCUIT A				CIRCUIT B			Total		MCA	MOCP		ICF
												FLA			FUSE
SIZE											Qty
		Min	Max	Qty	RLA		LRA	Qty	RLA	LRA
	208/230-3-60	187	254		48.1		245		48.1	245		6.6	121.4	150	150	306.3
025	380-3-60	342	418		23.7		145		23.7	145		3.9	61.1	80	70	176.5
	460-3-60	414	506	1	18.6		125	1	18.6	125	2	3.3	48.5	60	60	150.2
	575-3-60	518	632		14.7		100		14.7	100		2.6	38.3	50	45	119.9
	380/415-3-50	342	440		18.6		118		18.6	118		3.3	48.5	60	60	143.2
	208/230-3-60	187	254		51.3		300		51.3	300		6.6	128.6	175	150	364.5
027	380-3-60	342	418		26.9		139		26.9	139		3.9	68.3	90	80	173.7
	460-3-60	414	506	1	23.1		150	1	23.1	150	2	3.3	58.6	80	70	179.7
	575-3-60	518	632		19.9		109		19.9	109		2.6	50.0	60	60	134.1
	380/415-3-50	342	440		23.1		140		23.1	140		3.3	58.6	80	70	169.7
	208/230-3-60	187	254		55.8		340		55.8	340		6.6	138.8	175	175	409.0
030	380-3-60	342	418	1	34.0		196	1	34.0	196		3.9	84.3	110	100	237.8
	460-3-60	414	506		26.9		179		26.9	179	2	3.3	67.1	90	80	212.5
	575-3-60	518	632		23.7		132		23.7	132		2.6	58.5	80	70	160.9
	380/415-3-50	342	440		26.9		174		26.9	174		3.3	67.1	90	80	207.5
	208/230-3-60	187	254		35.8		239		33.4	225		6.6	167.2	200	175	361.4
040	380-3-60	342	418		23.7		145		19.2	140		3.9	103.5	125	110	218.9
	460-3-60	414	506	2	17.9		125	2	16.7	114	3	3.3	83.6	100	90	186.2
	575-3-60	518	632		14.3		80		13.4	80		2.6	66.7	80	70	128.8
	380/415-3-50	342	440		17.9		118		16.7	111		3.3	83.6	100	90	179.2
	208/230-3-60	187	254		51.3		300		51.3	300		6.6	231.4	250	250	467.3
050	380-3-60	342	418		26.9		139		26.9	139		3.9	119.6	125	125	225.0
	460-3-60	414	506	2	23.1		150	2	23.1	150	3	3.3	99.1	110	110	220.2
	575-3-60	518	632		19.9		109		19.9	109		2.6	82.0	100	90	166.1
	380/415-3-50	342	440		23.1		140		23.1	140		3.3	99.1	110	110	210.2
	208/230-3-60	187	254		51.3		300		55.8	340		6.6	254.6	300	300	524.8
060	380-3-60	342	418		26.9		139		34.0	196		3.9	145.9	175	175	299.4
	460-3-60	414	506	2	23.1		150	2	26.9	179	4	3.3	119.9	125	125	265.3
	575-3-60	518	632		19.9		109		23.7	132		2.6	103.5	125	110	205.9
	380/415-3-50	342	440		23.1		140		26.9	174		3.3	119.9	125	125	260.3
	208/230-3-60	187	254		55.8		340		46.1	245		6.6	296.3	300	300	566.5
070	380-3-60	342	418		34.0		196		23.7	145		3.9	163.2	175	175	316.7
	460-3-60	414	506	2	26.9		179	3	18.6	125	4	3.3	129.5	150	150	274.9
	575-3-60	518	632		23.7		132		14.7	100		2.6	107.8	125	125	210.2
	380/415-3-50	342	440		26.9		174		18.6	118		3.3	129.5	150	150	269.9
	208/230-3-60	187	254		55.8		340		55.8	340		6.6	326.0	350	350	596.2
080	380-3-60	342	418		34.0		196		34.0	196		3.9	198.0	225	225	351.5
	460-3-60	414	506	2	26.9		179	3	26.9	179	5	3.3	157.7	175	175	303.1
	575-3-60	518	632		23.7		132		23.7	132		2.6	137.4	150	150	239.8
	380/415-3-50	342	440		26.9		174		26.9	174		3.3	157.7	175	175	298.1
	208/230-3-60	187	254		51.3		300		55.8	340		6.6	374.9	400	400	645.1
090	380-3-60	342	418		26.9		139		34.0	196		3.9	214.6	225	225	368.1
	460-3-60	414	506	3	23.1		150	3	26.9	179	6	3.3	176.5	200	200	321.9
	575-3-60	518	632		19.9		109		23.7	132		2.6	152.3	175	150	254.7
	380/415-3-50	342	440		23.1		140		26.9	174		3.3	176.5	200	200	311.9
	208/230-3-60	187	254		55.8		340		55.8	340		6.6	388.4	400	400	658.6
100	380-3-60	342	418		34.0		196		34.0	196		3.9	235.9	250	250	389.4
	460-3-60	414	506	3	26.9		179	3	26.9	179	6	3.3	187.9	200	200	333.3
	575-3-60	518	632		23.7		132		23.7	132		2.6	163.7	175	175	266.1
	380/415-3-50	342	440		26.9		174		26.9	174		3.3	187.9	200	200	328.3

		LEGEND
FLA	— Full Load Amps
ICF	—	Maximum Instantaneous Current Flow
LRA	—	Locked Rotor Amps
MCA —		Minimum Circuit Amps
MOCP—		Maximum Overcurrent Protection
RLA	—	Rated Load Amps

NOTES:

1.Units are suitable for use on electrical systems where voltage supplied to the unit terminals is not below or above the listed minimum and maximum limits. Maximum allowable phase imbalance is: voltage 2%; amps 10%.

2.All units or modules have single point primary power connec- tion. Main power must be supplied from a field-supplied disconnect.

3.For MCA that is less than or equal to 380 amps, 3 conductors are required.

For MCA between 381 and 760 amps, 6 conductors are required.

Calculation of conductors required is based on 75 C copper wire.

4.Wiring for main field supply must be rated 75 C. Use copper conductors only.

a. Incoming wire size range for terminal block with MCA up to 175 amps is 14 AWG (American Wire Gage) to 2/0.

b. Incoming wire size range for terminal block with MCA from

175.1 amps to 420 amps is 2 AWG to 600 kcmil.

c.Incoming wire size range for non-fused disconnect with MCA up to 100 amps is 14 AWG to 1/0.

d.Incoming wire size range for non-fused disconnect with MCA from 100.1 amp to 200 amps is 6 AWG to 350 kcmil.

e.Incoming wire size range for non-fused disconnect with MCA from 200.1 amp to 450 amps is 3/0 to 500 kcmil.

32