2Models 750, 751, 754, 774, 794To the Operator
050818
Section 2 To the Operator
The freezer you have purchased has been caref ully
engineered and manufactured to give you dependable
operation. The Taylor Company soft-serve models
covered in this manual consist of the following: 750,
751, 754, 774, and 794.
Theseunit s, when properly operated and cared for, will
produce a consistent quality product. Like all
mechanical products, they will require c leaning and
maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed closely.
This Operator’s Manual should be r ead before
operating or performing any maintenance on your
equipment.
Your Taylorf reezer will NOT eventually compensate
for and correct any errors during the set-up or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is strongly
recommended that personnel responsible for the
equipment’s operation, both assembly and
disassembly, go through these procedures together in
order to be properly trained and to make sure that no
confusion exists.
In the event you should require technical assistance,
pleasec ontact your local authorized TaylorDis tributor.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the EU Directive as well as other similar
legislation in effect after August 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsort ed
municipal waste.
The user is responsible for returning the product to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/ or local
distributor.

Compressor Warranty Disclaimer

The refrigeration compressor(s) on this machine are
warranted for the term indicated on the warranty c ard
accompanying this machine. However, due to the
Montreal Protocol and the U.S. Clean Air Act
Amendments of 1990, many new refrigerants ar e
being tested and developed, thus seeking their way
into the service industry. Some of these new
refrigerants are being advertised as drop-in
replacements for numerous applications. It shouldbe
noted that, in the event of ordinary service to t his
machine’s refrigerationsystem, only therefrigerant
specifiedon the affixed datalabel should be used.
The unauthorized use of alternate refrigerants will void
your compressor warranty. It will be the owner ’s
responsibility to make this fact known to any tec hnician
he employs.
It should also be noted that Taylordoes not warr antt he
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinaryservice
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerant is banned, obsoleted, or no longer available
during the five year warranty of the compressor.
The Taylor Company will continue to monitor the
industry and test new alternates as they are being
developed. Should a new alternate prove, through our
testing, that it would be accepted as a drop-in
replacement, then the above disclaimer would
become null and void. Tofind out thecurrent statusof
an alternate refrigerant as it relates to your
compressor warranty, call the local Taylor Distributor
or the Taylor Factory. Be prepared to provide the
Model/Serial Number of the unit in question.