CONTENTS |
|
| Page |
GENERAL | 2 |
UNIT INSPECTION | 2 |
INSTALLATION | |
LOCATE UNIT | 2 |
LEVEL | 4 |
INSTALL SHELVES | 5 |
CONDENSATE DISPOSAL | 5 |
PRELIMINARY CHECKS | 6 |
INITIAL | 7 |
REFRIGERATION SYSTEM SERVICE | |
COMPONENTS | 8 |
SERVICE AND TROUBLESHOOTING .... | |
MAINTENANCE | |
LAMP REPLACEMENT | 12 |
CONDENSATE REMOVAL | 12 |
CONDENSER/EVAPORATOR | 12 |
CABINET EXTERIOR | 12 |
INTERIOR SURFACE | 12 |
GENERAL
These instructions cover the installation, operation, and maintenance of Carrier Miracool™ series glass door merchandiser units, size 2000L.
UNIT INSPECTION
Examine all packages for damage to packaging material. Damage to external packaging may have resulted in unit damage. Check packages for all accessories and components, including legs, casters, and shelves. File a claim immediately with the shipping company if shipment is damaged or incomplete.
INSTALLATION
LOCATE UNIT
Refer to Figure 1 for unit components. Units are designed for indoor placement only. Provide at least 3 inches of space between unit cabinet and any adjacent wall or fixture.
Remove skid base by removing the retaining screws (8 hex head bolt screws). Refer to Figure 2 to remove the front grille and gain access to skid retaining screws. If optional casters will be used, unit must be located on flat, level surface. Refer to Table 1 for a list of standard parts.
TABLE 1 – STANDARD PARTS
PART | FACTORY | FIELD INSTALLED | QUANTITY |
| INSTALLED |
|
|
|
|
|
|
Shelves |
| X | 15 |
|
|
|
|
Shelf Clips |
| X | 60 |
|
|
|
|
Instruction Manual | - | - | 1 |
|
|
|
|
Leveling Feet | X |
| 4 |
|
|
|
|
Lamps | X |
| 4 |
|
|
|
|
Note: Parts shown are for standard units. Quantity of shelves and clips may vary based on
2
