Quick Start Guide

PPPInternet Connection and Public IP Address Routing

PPPInternet Connection and

Public IP Address Routing

Router in Slot 1

ISP Router that provides the Internet connection.

Command

set clock1 a:1 set 1 default disconnect a:1

disconnect 1

set a:1:all type data connect a:1:all 1:1:1

rename 1 "LocalUnit" "Boulder"

rename 1 "RemoteUnit" "wan1"

set 1:1 ip address 215.168.21.14 255.255.255.0

add 1 "wan1" static ip network

0.0.0.00.0.0.0 1

set 1 "wan1" trunk 1

reset 1

Description

Set primary master transmit clock source

Set Router to default settings

Disconnect all connections to the T1 on the Controller (slot a)

Disconnect all connections to the router in slot 1

Set the T1-1 of the Controller, Type to Data

Connect all of T1-1 to the Router that is in slot 1

Rename the from "LocalUnit" (default) to "Boulder" (LAN)

Rename WAN #1 from "RemoteUnit" (default) to "wan1"

Set the ethernet IP address, in the conventional IP address format. (Router LAN)

Adds a static IP network (route) to the WAN interface

Set the WAN interface named "wan1" to be mapped to trunk 1

Reboot the router, to enable all configurations set

IP Router - Release 1.8

5

Page 5
Image 5
Carrier Access 002-0118-0180 quick start PPP Internet Connection Public IP Address Routing, Router in Slot