2. SAFETY

IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

CAUTION: RISK OF ELECTRIC SHOCK, DO NOT OPEN.

WATER AND MOISTURE: Electronic equipment should not be used near water (near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES: The electronic equipment should be connected to a power supply only of the type described in the operating instructions or as marked on the electronic equipment.

GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polarization means of an electronic equipment is not defeated.

POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the electronic equipment.

SERVICING: The user should not attempt to service the electronic equipment beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type.

This equipment has been tested and found to comply with international safety standards.

Warranty Information:

LIMITED WARRANTY

Your Carvin processor is guaranteed against failure for 1 YEAR unless otherwise stated. Carvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

SERVICE:

In the USA go to www.carvinservice.com

Outside the USA, contact your dealer or go to http://www.carvinworld.com for your nearest service center. Include a written description of the problem with serial number and date of purchase.

MAINTAINING YOUR EQUIPMENT

Avoid spilling liquids or allowing any other foreign matter inside the unit. The panels of your unit can be wiped from time to time with a dry or slightly damp cloth in order to remove dust and bring back the new look. As with all pro gear, avoid prolonged use in caustic environments such as dust or salt air. When used in such an environment, be sure the unit is adequately protected by a cover.

Please record the unit’s serial number, invoice number and invoice date (purchase date).

Serial No.:_____________________________________

Invoice No.:____________________________________

Invoice Date:___________________________________

3

Page 2 Page 4
Page 3
Image 3
Carvin EQ430 manual IMPORTANT! for Your PROTECTION, Please Read the Following, Serial No Invoice No Invoice Date
Page 2 Page 4

EQ430 specifications

The Carvin EQ430 is a versatile and powerful equalizer that caters to audio professionals, musicians, and sound engineers seeking high-quality performance and flexibility. Known for its robust build and user-friendly interface, the EQ430 stands out as a reliable tool for enhancing audio clarity and tonal balance.

One of the primary features of the Carvin EQ430 is its 30-band graphic equalizer, offering precise control over frequency ranges. The equalizer is capable of handling a range of 20Hz to 20kHz, allowing users to tailor their sound with acute accuracy. Each frequency band is adjustable in 1/3-octave increments, providing extensive options for fine-tuning audio to meet specific requirements in various environments, be it live performances, studio work, or installations.

The EQ430 utilizes low-noise op-amps and high-grade capacitors, ensuring optimal audio fidelity and performance. The design incorporates a high-quality signal path that minimizes distortion and maximizes dynamic range, making the device suitable even for high-level sound applications.

In addition to the extensive equalization capabilities, the EQ430 features LED level indicators that allow for real-time monitoring of signal levels. This visual feedback is crucial for sound engineers when making adjustments during a performance, ensuring that the audio output remains in the optimal range without risk of clipping.

The inclusion of an internal limiter is another advantage of the Carvin EQ430. This feature automatically controls the output level, preventing potential distortion from overly aggressive settings. Such protective measures can be invaluable in live situations where varying sound levels are common.

Another notable characteristic of the EQ430 is its rugged construction, designed to withstand the rigors of touring and travel. With a compact 19-inch rack-mountable format, it easily integrates into any sound system setup without taking up excessive space.

Overall, the Carvin EQ430 combines sophisticated equalization features with robust technology and reliable performance, making it an excellent choice for anyone looking to enhance their audio systems. Whether you are refining a live sound mix or perfecting a studio track, the EQ430 delivers the precision and versatility needed to achieve professional-quality results in any audio environment.
Top Page Image Contents