Cary Audio Design CAD-211M specifications Specifications

SPECIFICATIONS

Operating the CAD-211M amplifiers is a simple procedure since each unit is designed for long term stability in virtually any home operating situation. Therefore, if the unit is operated outside the parameters outlined in this owner’s manual, damage may result. Please read this manual carefully before putting your new Cary Audio Design CAD-211M mono block amplifier into operation.

The following definitions are applicable to this manual. These definitions must be followed explicitly.

WARNING: ELECTRICAL HAZARD! MISUSE OR FAILURE TO FOLLOW INSTRUCTIONS PROPERLY MAY RESULT IN PERSONAL

INJURY OR DEATH!

CAUTION:	No risk of personal injury; however, misuse or failure to follow
	instructions may result in damage of equipment.
NOTE:	No risk of personal injury or equipment damage; however, misuse or
	failure to follow instructions may prevent proper performance
of the	equipment.

1.2

Specifications

The following section describes the CAD-211M basic specifications. Specifications are subject to change without notice or obligation.

POWER OUTPUT:	80W
FEEDBACK:	Zero
FREQUENCY
RESPONSE:	20Hz - 20KHz +
NOISE:	80dB Below Rated Output
SENSITIVITY:	2V
TUBE COMPLIMENT:	2 - 845 Output

2