Cary Audio Design CAD-211M Unpacking, Warranty Card, Amplifier Placement, Installation

INSTALLATION

This section describes the unpacking and installation procedures for the CAD-211M mono-blocks.

WARNING

Do not attempt operation without the bottom plate attached. Contact with voltage in the

CAD-211M can be fatal!!!

2.2

Unpacking

All shipping containers have been specifically designed to protect its contents and special care has been taken to prevent damage under normal shipping conditions. Mishandling should be evident upon inspection. If damage is found, take care not to destroy the evidence. Document any damage with photographs and contact the transport carrier immediately.

Carefully remove the CAD-211M amplifier from its packing carton and examine closely for signs of shipping damage. Save all original packing cartons for future storage or after- sale service.

2.3

Warranty Card

Fill out the enclosed Warranty Registration Card and return to Cary Audio Design within 10 days of the original purchase. Keep your original sales slip and packing cartons for future reference. Failure to register warranty will limit the warranty to one year.

2.4

Amplifier Placement

In general, the location of the CAD-211M amplifier is not critical. The best placement of the amplifier is near the speakers with short lengths of speaker cables. Certain precautions must be taken to avoid radiators or other heating units. Keep the top of the CAD-211M clear of books, paper or other equipment to protect against overheating.

5