Cary Audio Design CAD-805AE CONTROLS AND DISPLAYS

CONTROLS AND DISPLAYS

CAT EYE TUBE Indicates approximate power output level. When the eye is

completely closed the amplifier is at full power output.

OFF-ON TOGGLE SWITCH Turns AC power on in the rear position. The output tube will not

light at this point.

STANDBY SWITCH Turns the filament of the output tube on in the rear position.

TUBE SELECTOR SWITCH Set either to 211 or 845 before installing selected output tube.

FEEDBACK LEVEL Adjusts the level of feedback from 0 to 10 dB

INPUT Signal input connection via shielded RCA interconnect cable

OUTPUT Three 5-way binding posts provide output to the speaker system

(4, 8 or 16 ohm connections).

FUSE AC power fuse. Never replace with any other value than 3 AMP

SLOW BLOW FUSE! 250 VOLT!

TUBE FUSE Never replace with any other fuse than ¼ amp FAST BLOW

FUSE!