IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Please refer to qualified personnel for service.

ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the component.

1.READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read before power is applied to the equipment.

2.RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.

3.HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

5.CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended by the manufacturer.

6.ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.

7.WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.

8.ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

9.VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.

10.GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11.POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power company.

12.POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience receptacle, and the point where they exit from the unit.

13.OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2

Page 2 Page 4
Page 3
Image 3
Cary Audio Design CAD 120S owner manual Important Safety Instructions
Page 2 Page 4

CAD 120S specifications

Cary Audio Design has long been synonymous with high-fidelity audio equipment, and their CAD 120S amplifier exemplifies this commitment to quality and innovation. The CAD 120S is a stunning piece that bridges the gap between the classic analog warmth of tube amplification and the precision of modern technology.

At the heart of the CAD 120S lies a premium dual-triode design using 6550 power tubes, offering an impressive output of 120 watts per channel. This robust power allows the amplifier to drive a wide range of loudspeakers with ease, delivering a dynamic listening experience. The amplifier features a push-pull circuitry configuration, which enhances linearity and minimizes distortion, ensuring that both subtle nuances and loud crescendos are reproduced faithfully.

One of the standout features of the CAD 120S is its sophisticated power supply. Designed with separate power transformers for each channel, it maintains low noise levels and provides exceptional headroom. This approach not only enhances sonic clarity but also contributes to the longevity of the components, a hallmark of Cary's design philosophy.

Additionally, the CAD 120S boasts a fully-balanced input stage, which is essential for preserving the integrity of the audio signal over longer cable runs. The use of high-quality components throughout the signal path ensures that the amplifier delivers a warm, rich sound, devoid of harshness. Cary Audio Design's commitment to craftsmanship is evident in the CAD 120S's construction, featuring a sturdy chassis and a meticulously finished front panel that is as visually appealing as it is functional.

For audiophiles, the CAD 120S is not just an amplifier; it is a gateway to a lifelike musical experience. Its ability to handle a wide frequency range contributes to a soundstage that is expansive and immersive. The depth and detail provided by this amplifier allow listeners to engage with their favorite records in a way that is both fulfilling and exciting.

In conclusion, the Cary Audio Design CAD 120S is a remarkable amplifier that fuses traditional tube warmth with cutting-edge engineering. Its powerful output, balanced design, and high-quality components make it a standout choice for any serious music lover looking to elevate their audio system. With its timeless design and exceptional performance, the CAD 120S continues to build on Cary's legacy of audio excellence.
Top Page Image Contents