IMPORTANT SAFETY INSTRUCTIONS

14.LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

15.POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

22.HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.

23.IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is always good practice to make certain that all components are turned off, and preferably unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an installation, causing the potential for damage to electronic components and/or speakers. Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on, contact your authorized service representative.

Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary Audio for further instructions.

24.RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

25.NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

3

Page 3 Page 5
Page 4
Image 4
Cary Audio Design CAD 120S owner manual Important Safety Instructions
Page 3 Page 5

CAD 120S specifications

Cary Audio Design has long been synonymous with high-fidelity audio equipment, and their CAD 120S amplifier exemplifies this commitment to quality and innovation. The CAD 120S is a stunning piece that bridges the gap between the classic analog warmth of tube amplification and the precision of modern technology.

At the heart of the CAD 120S lies a premium dual-triode design using 6550 power tubes, offering an impressive output of 120 watts per channel. This robust power allows the amplifier to drive a wide range of loudspeakers with ease, delivering a dynamic listening experience. The amplifier features a push-pull circuitry configuration, which enhances linearity and minimizes distortion, ensuring that both subtle nuances and loud crescendos are reproduced faithfully.

One of the standout features of the CAD 120S is its sophisticated power supply. Designed with separate power transformers for each channel, it maintains low noise levels and provides exceptional headroom. This approach not only enhances sonic clarity but also contributes to the longevity of the components, a hallmark of Cary's design philosophy.

Additionally, the CAD 120S boasts a fully-balanced input stage, which is essential for preserving the integrity of the audio signal over longer cable runs. The use of high-quality components throughout the signal path ensures that the amplifier delivers a warm, rich sound, devoid of harshness. Cary Audio Design's commitment to craftsmanship is evident in the CAD 120S's construction, featuring a sturdy chassis and a meticulously finished front panel that is as visually appealing as it is functional.

For audiophiles, the CAD 120S is not just an amplifier; it is a gateway to a lifelike musical experience. Its ability to handle a wide frequency range contributes to a soundstage that is expansive and immersive. The depth and detail provided by this amplifier allow listeners to engage with their favorite records in a way that is both fulfilling and exciting.

In conclusion, the Cary Audio Design CAD 120S is a remarkable amplifier that fuses traditional tube warmth with cutting-edge engineering. Its powerful output, balanced design, and high-quality components make it a standout choice for any serious music lover looking to elevate their audio system. With its timeless design and exceptional performance, the CAD 120S continues to build on Cary's legacy of audio excellence.
Top Page Image Contents