SUPER MICRO Computer AOC-USAS-S4IR manual Chapter Safety Guidelines, ESD Safety Guidelines

Safety Information and Technical Specifi cations

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electric Static Discharge (ESD) can damage electronic components. To prevent dam- age to your system, it is important to handle it very carefully. The following measures are generally suffi cient to protect your equipment from ESD.

•Use a grounded wrist strap designed to prevent static discharge.

•Touch a grounded metal object before removing a component from the anti- static bag.

•Handle the add-on card by its edges only; do not touch its components, pe- ripheral chips, memory modules or gold contacts.

•When handling chips or modules, avoid touching their pins.

•Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

•Always disconnect power cables before installing or removing any components from the computer.

•Disconnect the power cable before installing or removing any cables from the system.

•Make sure that the add-on card is securely and properly installed on the moth- erboard to prevent damage to the system due to power shortage.

1-3 An Important Note to Users

•All images and layouts shown in this user's guide are based upon the latest PCB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual.

1-1