Cary Audio Design CD-500 Welcome, Unpacking And Installation, Power Requirement, Connections

Models: CD-500

1 23
Download 23 pages 1.3 Kb
Page 6
Image 6
UNPACKING AND INSTALLATION

WELCOME

UNPACKING AND INSTALLATION

Unpacking

Your Cary Audio Design product was shipped in a carton particularly designed to protect its contents, and special care has been taken to prevent damage during shipping.

Carefully remove your new component from its packing carton and examine it closely for signs of shipping damage. If shipping damage is discovered, document the damage with photographs, contact the transport carrier immediately, and retain the packing as evidence.

We strongly recommend saving all original packing cartons to protect your component for storage or future shipping.

Power Requirement

The CD-500 is designed to operate from AC mains current. The specified AC voltage is either 110-120 volts or 220-240 volts AC at 50-60 Hz.

Connections

Digital Outputs: These outputs send a digital signal and should be connected only to the appropriate digital input of an accompanying component.

Analog Outputs: These are for connection to the CD or AUX input jacks of an accompanying preamplifier or amplifier.

Warranty Card

If you are the original purchaser of this unit and you purchased it in the United States, fill out the enclosed warranty registration card and return it to Cary Audio Design within 15 days of your purchase. Warranty restrictions apply. Consult the warranty section of this manual for details. Please keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to validate the warranty if necessary.

5

Page 6
Image 6
Cary Audio Design CD-500 owner manual Welcome, Unpacking And Installation, Power Requirement, Connections, Warranty Card