IMPORTANT SAFETY INSTRUCTIONS

14.LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

15.POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

22.HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.

23.IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is always good practice to make certain that all components are turned off, and preferably unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an installation, causing the potential for damage to electronic components and/or speakers. Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on, contact your authorized service representative.

Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary Audio for further instructions.

24.RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

25.NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

3

Page 4
Image 4
Cary Audio Design CPA 1 owner manual Important Safety Instructions

CPA 1 specifications

Cary Audio Design has long been synonymous with high-quality audio components, and their CPA 1 preamplifier is no exception. This innovative preamp showcases the brand's dedication to crafting audio equipment that delivers exceptional sound quality and functionality.

One of the standout features of the CPA 1 is its all-tube design, which provides a warmth and depth of sound that is often sought after by audiophiles. The use of high-end vacuum tubes not only enhances the musicality of the audio playback but also introduces a certain character that solid-state components cannot replicate. Tubes, known for their natural harmonic distortion, contribute to the richness of the soundstage, making the listening experience genuinely immersive.

The CPA 1 supports a variety of input options, including multiple RCA inputs and a balanced XLR input, allowing users to connect a range of audio sources seamlessly. This flexibility makes the CPA 1 a versatile choice for any audio setup. Additionally, it features a high-quality phono stage, which is ideal for vinyl enthusiasts looking to get the best sound from their turntables.

Another notable aspect of the CPA 1 is its remote control functionality, adding convenience to the user's experience. The unit also features an adjustable output level, making it easy to achieve the perfect volume for any pairing with power amplifiers or other audio gear. The incorporation of a high-grade volume control ensures precision and reduces unwanted noise, further elevating audio fidelity.

Cary Audio’s commitment to build quality is evident in the CPA 1's construction. The chassis is robust, designed to minimize interference while providing aesthetic appeal. The attention to detail extends to the component selection as well, utilizing premium parts to ensure longevity and reliable performance.

Integrated into the CPA 1 are various proprietary technologies that enhance performance, including power supply regulation to improve noise filtering and dynamic range. The combination of these technologies ensures that the CPA 1 produces clean, articulate sound that satisfies even the most discerning listeners.

In summary, the Cary Audio Design CPA 1 preamplifier is an exemplary piece of audio engineering, combining traditional tube warmth with modern convenience and adaptability. With its premium build quality, versatile connectivity, and emphasis on sound purity, the CPA 1 is a top contender for anyone seeking to elevate their audio experience.