Cary Audio Design installation manual SPECIFICATIONS SLP-88

Cary Audio Design SLP-88 Preamplifier Operations Manual

- 3 -

SPECIFICATIONS: SLP-88

Dimensions: 16” W x 5” H x 12” D

Weight: 15 lb..

Circuit: Class A Triode

Input Impedance: 100,000 (100K) ohms resistive

Output Impedance: 680 ohms

Gain: 20 dB

Signal/Noise Level: -88 dB

Resistors: 1 % metal film

Capacitors: Film and foil output caps, 5 micro farad (5 mFd)

Power Transformer: 200% continuous commercial duty cycle

Tubes: 2- 6SN7 dual triodes

Power Supply: Full wave rectification, center-tapped, pi-network with filter choke, fully regulated

AC

Power Requirements: 100 – 130 volts AC / 50-60 Hz at 24 watts 200 – 245 volts AC / 50-60 Hz at 24 watts

Wire: EE Teflon Silver

Warm-up Time: 5 minutes (2 minute auto mute)

Input and

Output Jacks: Gold plated with Teflon inserts

Duty Cycle: Continuous duty 24 hours per day

This section describes the basic specifications of the SLP-88 at the time of printing. Specifications are subject to change or improvement without notice or obligation.