Cary Audio Design Installation And Unpacking, Warranty Card, SLP-88PLACEMENT

Cary Audio Design SLP-88 Preamplifier Operations Manual

- 5 -

INSTALLATION AND UNPACKING

WARNING

MAKE NO ATTEMPT TO PUT THE SLP-88 PREAMPLIFIER IN SERVICE WITH THE COVER OFF THE UNIT. CONTACT WITH AC VOLTAGE INSIDE THE SLP-88 CAN BE FATAL!

All our shipping cartons have been especially designed to protect their contents and special care has been taken to prevent damage under normal conditions. Mishandling should be evident upon inspection of the shipping container. If damage is found after visual inspection, do not destroy the evidence. If necessary, document the damage with photographs and contact the transport carrier immediately.

Carefully remove your new SLP-88 from its packing carton and examine it closely for signs of shipping damage. It is recommended to save all original packing cartons to protect your preamplifier should you wish to store it or ship it for after-sales service.

WARRANTY CARD

If you are the original USA purchaser of this preamplifier and purchased it for use within the United States, you should fill out the enclosed warranty registration card and return it to Cary Audio Design, within 10 days of your purchase. Warranty restrictions and applications may apply. Consult the warranty section of this manual. Export models are covered by local warranties assigned by your local Cary Audio distributor.

SLP-88 PLACEMENT

The SLP-88 is designed for use inside of homes. It must be protected from the elements and temperature extremes. For example, avoid placing the unit in extremely hot locations such as near or on top of radiators or other home heating devices. Its location among the user’s home audio components is not critical.

POWER REQUIREMENTS

The SLP-88 is designed to operate from AC house current mains. The design voltage is 120 Volts AC at 50/60 Hz. Export units have settings for 100/200/220/240 Volts AC at 50/60 Hz.