Casablanca Fan Company 38DHxxT UPPER AND LOWER GLASS parts, INSTALLING THE upper glass shade

UPPER AND LOWER GLASS parts

	HALOGEN BULB	UPPER
	100 Watt
		GLASS
GLASS SHADE		SHADE	UPPER GLASS
			SHADE BRACKET
	INCANDESCENT BULB		(3)
	60-Watt (3)

INSTALLING THE upper glass shade

IMPORTANT! To avoid possible damage to the Halogen bulb holder the fan must be placed on the bottom styrofoam packaging from the box. After removing the top half of the styrofoam, take the bottom half from the box and place it on the floor. Take out all parts from the bottom foam and place the fan back in the form fitted recess.

UPPER

GLASS

SHADE

BRACKET

Step 5. Carefully place the upper glass shade on the foam covered brackets. Assure the glass sits evenly on the bracets and is centered.

Step 6. Take the three upper glass shade brackets and place them in the holders as shown. Using the supplied screws, tight- en a few turns on each bracket until all three are in place. DO NOT TIGHTEN COMPLETELY.

Step 7. Rotate the tightening of the brackets until all are snug.

DO NOT OVERTIGHTEN.

UPPER

GLASS

SHADE

NOTE: Make a note of the Fan Serial Number and Model Type before install- ing the top cover.

FOAM COVERED

BRACKET

fan motor

assembly

WARNING!

DO NOT USE AN ELECTRIC SCREWDRIVER AS

YOU MAY ACCIDENTALLY OVETIGHTEN THE

BRACKETS AND CAUSE THE GLASS TO BREAK.

INSTALLING THE upper glass shade

Step 8. Istall the three 60-Watt frosted incandescent bulbs as shown.

Note: Use 3 maximum 60-Watt B10 candelabra incandescent bulbs.

6