Bel Air® Halo
LAG SCREW INSTALLATION
Step 3. With the large washer attached, pass the lag screw through the center hole of the crosbar mounting bracket and screw into guide hole. Tighten until outlet box is firmly mounted to beam. This box must be firmly secured to the ceiling. We recommend that the ceiling fixture outlet box be of sufficient capacity enabling it to support the weight of fan and light fixture under any conditions.
lag
screw
LARGE
WASHER
CANOPY HARDWARE
CANOPY SCREW (4)
CANOPY | CANOPY LOCK WASHER (4) |
HATCH | CANOPY |
canopy INSTALLATION
Step 4. Attach the canopy to the crossbar mounting bracket with three of the
Note: On sloped ceilings, align the canopy opening toward the top or peak of the room.
canopy
lock
washer
FEED OUTLET BOX |
|
WIRES THROUGH | canopy |
CANOPY OPENING | |
| screw |
5
