Canopy

Screw

Position the canopy so that, when	Lift the canopy into place so that
lifted into place, the canopy fits into	the screw holes are aligned.
the hanging bracket as shown.

www.CasablancaFanCo.com 1.888.227.2178

Insert the two canopy screws

Note: Fan style may vary.

M6002-01 • 06/07/12 • Casablanca Fan Company

Image 11

Contents

Table of Contents What to Expect with Your Installation Ladder Pliers Screwdrivers Power Drill Drill Bit OptionalTools Needed Fan from a vaulted or angled ceiling See previous Mounting OptionsStandard Ceiling Mounting Outlet Box Style Required For angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Remove the shipping blocks from Ceiling Bracket Installation Preparation Downrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrod Fan Put the wires and downrod through Wiring Insert the two canopy screws Found Hardware bag Canopy Blades Which two screw holes you choose Twist counterclockwise Switch Housing Line up the colored markings on Coming from the switch housing To switch the direction of air Maintenance & Cleaning Fan doesn’t work Troubleshooting