Tighten the setscrew

www.CasablancaFanCo.com

1.888.227.2178

Remove the pre-installed	Hand tighten the downrod (at	The wires can be cut, but	Tighten the setscrew
setscrew so that the downrod	least 4-5 full turns) until it stops.	leave at least 8” extending	with pliers. DO NOT
can be inserted.		from the top of the downrod.	HAND TIGHTEN.

8”

3/8”

If the setscrew is not tightened securely, the fan may fall.

M6002-01 • 06/07/12 • Casablanca Fan Company

Image 8

Contents

Table of Contents What to Expect with Your Installation Ladder Pliers Screwdrivers Power Drill Drill Bit OptionalTools Needed Fan from a vaulted or angled ceiling See previous Mounting OptionsStandard Ceiling Mounting Outlet Box Style Required For angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Ceiling Bracket Installation Preparation Remove the shipping blocks from Downrod Remove the pre-installed Hand tighten the downrod at Tighten the setscrewSetscrew so that the downrod Leave at least 8 extending Put the wires and downrod through Fan Wiring Canopy Insert the two canopy screws Found Hardware bag Blades Switch Housing Which two screw holes you choose Twist counterclockwise Coming from the switch housing Line up the colored markings on Maintenance & Cleaning To switch the direction of air Troubleshooting Fan doesn’t work

Casablanca Fan Company 55002, 55000, 54022 Remove the pre-installed Hand tighten the downrod at