![](/images/new-backgrounds/1310142/31014217x1.webp)
Wall Installation
1Reposition the base wedge for wall use.
Press on the base wedge as shown in figure a to remove the wedge. Turn the wedge so that the larger end is toward the bottom of the telephone. Reattach the wedge by positioning it as shown in figure c and sliding it in the direction of the arrows until it locks in place.
figure a | figure b | figure c |
2Connect the short telephone line cord to the telephone. Plug one end of the short line cord into the jack labeled
TEL LINE and thread the cord through the tabs under the phone as shown.
continued on page 8
INSTALLATION
7