INSTALLATION
Table/Desk Installation
continued from page 5
4Connect the handset to the telephone.
Plug the coiled handset cord into the handset jack on the left side of the phone. Plug the other end of the coiled cord into the handset, then hang up.
handset jack
5Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear
a dial tone, press VOLUME +. If you still do not hear a dial tone, see the IN CASE OF DIFFICULTY section of this manual.
Your phone will work immediately after installation using the default feature settings (See “Default Settings” on page 31).
NOTE: If you subscribe to Caller ID services from your local telephone service provider, you must follow the instructions in “Set Home Area Code” for your phone to properly recognize and dial calls (see page 11). You may also need to “Set Local Area Codes” (see page 12).
6
