Table/Desk Installation
1Reposition the base wedge for table/desk use.
Press on the base wedge as shown in figure a to remove the wedge. Turn the wedge so that the larger end is toward the top of the telephone. Reattach the wedge by positioning it
as shown in figure c and sliding it in the direction of the arrows until it locks in place.
figure a | figure b | figure c |
2Connect the long telephone line cord to the jack labeled TEL on the back of the phone.
Modular telephone wall jack
Telephone line cord
INSTALLATION
3 Connect the line cord to a modular wall jack.
continued on page 6
5
