Whirlpool 6ED20PK important safety instructions Installing it properly, Leveling it

Installing it properly

I.Allow 1.25 cm (l/z inch) space on each side and at the top of the refrigerator for ease of installation.

2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.

3.The refrigerator can be flush against the wall.

Leveling it

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below.

1.Remove base grille. (See page 12.)

2.To raise front, turn screw clockwise.

3.To lower front, turn screw counterclock- wise.

4.Check with level.

5.Replace base grille. (See page 12.)

Right to raise; left to lower

Use a screw- driver to adjust