PART
Door liners and gaskets
Plastic parts (covers and panels)
Defrost pan
Condenser coils
Floor under refrigerator
WHAT TO USE
Sponge, soft cloth or paper towel with mild detergent and warm water
Soft, clean sponge or soft, clean cloth with mild detergent and warm water
Sponge or cloth with mild detergent and warm water
Vacuum cleaner with extended narrow attachment
Floor cleaners
HOW TO CLEAN
l Wash, rinse and dry thoroughly.
DO NOT USE cleaning waxes, concen- trated detergents, bleaches or cleaners
containing petroleum on plastic parts.
l Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window sprays, scouring cleansers or flam- mable fluids. These can scratch or damage material. See “Important Safety
Instructions” on page 3.
l Remove base grille. (See page 12.)
l To remove defrost pan, lift pan over wire brace (remove tape; if any).
l Wash, rinse and dry thoroughly.
l Replace with notched corner to the rear. Push it in all the way.
l Make sure defrost pan drain tube is pointing into pan.
l Replace base grille.
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.
l Replace base grille.
l Roll refrigerator out only as far as the water supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
15
