HRemove Firebox from Cabinet
[] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet. Remove the crossbar,
[] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from cabinet.
[] Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox.
Crossbar
Install Control Knobs and Casters
[] Push the Main Burner Control Knobs and Back Burner Control Knob onto the valve stems.
See Inset 1. The small knob goes onto the labeled valve stem for the rotisserie burner.
[] Place the Cabinet Assembly upside down and attach the 4 Casters to the bottom using 16 Phillips
Head Bolts (M6x16mm). Use care to install each Caster into the correct position. See Inset 2.
Inset I
Phillips Head Bolt M6x16mm qty: 16
Standard Caster
Caster
Main Burner Control knob qty: 4
Locking Standard Caster
Back Burner Control Knob qty: 1
Inset 2
10 | g Swivel Caster |
