Casablanca Fan Company 59057 operation manual Tools Needed

Models: 59057

1 20

Page 3

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers

Wire Strippers

Screwdrivers

Power Drill (optional)

9/64” Drill Bit

(optional)

If mounting to a support structure, you will also need these tools.

Image 3

Contents

Table of Contents What to Expect with Your Installation Tools Needed To hang the fan from a Standard Mounting AngledSupport Structure Standard Ceiling Mounting To hang the fan from a flat ceilingOpening toward peak Ceiling BracketHigher DownrodFor angled Ceilings orDownrod Tighten the setscrewLeave at least 8 extending From the topCover with the screw holes on Fan Flush against the motor housing Through the canopy. LetAlign the screw holes on the adapter Downrod ball into the slotAssembly as shown WiringOr common Using an orange wire connector fromWall Control BeforeAfter Holes CanopyBlades Light Kit Feed the wires from the bottomTuck the wires into the light kit, then lift Fan to the white wire from the light kitFound Hardware bag See next page for fan operation instructions Operation Battery Holder DoorHigh SpeedOFF Maintenance & CleaningFan doesn’t work Troubleshooting