Casablanca Fan Company 6643050 Canopy Hardware, Canopy Installation, Hanging The Fan, Panama

PANAMA ™

CANOPY HARDWARE

CANOPY SCREW (5)

CANOPY	CANOPY LOCK WASHER (5)
HATCH
	CANOPY

CANOPY INSTALLATION

Step 4. Attach the canopy to the crossbar mounting bracket with three of the 8-32 x 21/2” long canopy screws and lock washers provided with your Casablanca fan. Hand tighten until snug against the ceiling.

Note: On sloped ceilings, align the canopy opening toward the top or peak of the room.

CANOPY

LOCK

WASHER

FEED OUTLET BOX
WIRES THROUGH	CANOPY
CANOPY OPENING
	SCREW

Step 5. To hang the fan body in the canopy, hold the fan body firmly and insert the ball into the canopy open- ing. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball fits into the pin opposite the canopy opening.

NOTE: Independent control of the light fixture using a W-81 requires an additional power wire run from the wall switch to the fan. See Page 8 for wiring.

HANGING THE FAN

CAPPED	BALL
BLUE
D1-OPTION
WIRE ON
4-SPEED ONLY
FOR INDEPENDENT	SLOT	PIN
W-81 LIGHT
CONTROL

5