Casablanca Fan Company 6643050 warranty Speed Operation, Speed Optional Light Fixture Installation

4-SPEED

4-SPEED OPERATION

Pull-chain switches on the fan control the fan and lights. Using the fan control pull-chain switch: Fan off at start.

First pull: fan ON, High speed

Second pull: Medium speed

Third pull: Medium Low speed

Fourth pull: Low speed

Fifth pull: Fan OFF

Using the optional light pull-chain switch: Light off at start.

First pull: light ON

Second pull: light OFF

Direction of blade rotation is controlled by the reverse slide switch on the side of the switch housing.

No changes in household wiring are required.

OPTIONAL LIGHT	FAN & SPEED CON-
PULL CHAIN	TROL
SWITCH	PULL CHAIN SWITCH

REVERSE

SWITCH

4-SPEED • OPTIONAL LIGHT FIXTURE INSTALLATION

NOTE: If a separate circuit is used to control the lights from a wall control, the BLUE D1-Option wire in the canopy should be connected to that switch leg with the BLACK fan power wire.

1.Refer to light kit instructions to assemble and attach your light kit correctly.

2.Remove the two 8-32 screws from the switch housing cap.

3.Remove the plug from switch housing.

4.Install pull-chain switch and finger tighten collar on switch.

5.Connect one wire from pull-chain switch to the BLUE D1-Option wire. Secure splice with a wire nut.

6.Connect other wire from pull-chain switch to BLACK wire from light kit. Secure splice with a wire nut.

7.Connect WHITE wire from switch housing to WHITE wire from light kit. Secure splice with a wire nut.

8.At the canopy, connect the BLACK and BLUE wires.

SWITCH

HOUSING

WHITE

BLACK

LIGHT FIXTURE

COLLAR

BLUE D-1

4-SPEED OPTIONAL WALL CONTROL • W-41

The W-41 wall control provides four-speed control of fan from a convenient wall location. The W-41 is designed to replace a standard wall switch and will fit wall boxes with a depth of 2” or greater. Not for use with single pull-chain fan/light option wiring.

To install a W-41 wall control in place of an existing wall switch, follow the instructions on the W-41 package.

Note: No rewiring is required if the fan is replacing an existing light fixture.

Operation of the fan from the wall switch is simple:

1. Turn knob to obtain desired speed setting.

CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of the fan and damage to the W-41 wall control. To confirm fan is set to HIGH: Turn W-41 fan speed switch to ‘HI’ - set fastest fan speed with pull chain.

4-SPEED • OPTIONAL WALL CONTROL • W-81

The W-81 wall control provides separate control of fan and light with two separate knobs from a convenient wall location. The W-81 is designed to replace a standard wall switch and wall boxes with a depth of 2” or greater. Requires two hot leads from wall box to ceil- ing wiring box.

To install a W-81 wall control in place of an existing		CAUTION! Failure to set the pull-chain
wall switch, follow the instructions on the W-81 package.		speed to HIGH can result in faulty operation
Operation of the fan from the wall switch is simple:		of the fan and damage to the W-81 wall
		control. To confirm fan is set to HIGH: Turn
1.	Turn the upper knob to the desired fan speed.
		W-81 fan speed switch to ‘HI’ - set fastest
2.	Turn the lower knob to the desired light setting.
		fan speed with pull chain.

	MED
LO	MED
	HI

OFFHI

OFF MAX

7