Casablanca Fan Company Bellatm Bella Ceiling Fan owner manual Canopy Hatch Installation

CANOPY HATCH INSTALLATION

Step 5. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.

Step 6. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.

Tighten the screws firmly by hand only,

Step 7. Straighten the fan, then check to ensure that there is no movement be- tween the canopy and ceiling or Hang-Tru ball and top support shaft.

CANOPY	TILT THE
	FAN TO
HATCH
	INSTALL
	LAST
LOCK	CANOPY
	SCREW
WASHER
CANOPY
SCREW

BLADE & BLADE HOLDER HARDWARE

BLADE SCREW	BLADE	BLADE
(4 PER BLADE)		BADGE
	HOLDER
BLADE HOLDER
SCREW
(2 PER BLADE)

BLADE BADGE INSTALLATION

Step 8. Attach the blades to the blade holders by first pressing the blade badge into the blade, then installing the blade holder using the four blade screws and flat washers provided for each blade.

Using the screwdriver, tighten securely by hand only.

Repeat for each blade assembly.

BLADE

BADGE

BLADE	BLADE SCREW
HOLDER	(4 PER BLADE)

BLADE

BLADE ACCESS PLATE REMOVAL

Step 9. Remove the blade access plate next to the light fixture. Set aside the two screws and the plate—they will be reinstalled later.

LIGHT

FIXTURE

BLADE ACCESS

PLATE

6