ESTRADA
BLADE INSTALLATION
Step 9. Attach the blades to the blade holders by first pressing the blade badge into the blade, then installing the blade holder using the four blade screws provided for each blade.
Using the screwdriver, tighten securely by hand.
BLADE SCREW (4 PER BLADE)
BADGE STYLE
BLADE HOLDER
BLADE
BLADE
BADGE
REMOVE SHIPPING BLOCKS
Step 10. On the flywheel remove the five shipping blocks by unscrewing the screws. Set these screws aside for installing the blades in Step 11.
Discard the five shipping blocks.
SHIPPING
BLOCKS
BLADE/BLADE HOLDER INSTALLATION
Step 11. Using the five screws removed in Step 10, and the five additional screws from the pack, attach each blade/blade holder as- sembly to the motor.
Using the screwdriver, tighten securely by hand only.
7
