Casablanca Fan Company PSG73M VERSATOUCH2 Control Installation, Control Bracket Installation

VERSA•TOUCH2™ CONTROL INSTALLATION

VERSA•TOUCH2™ HARDWARE (not to scale)

			Wood	Screw	Screw
		Drywall Anchor	Screw	6-32 X 3/8"	6-32 X 1"
	12v Battery	6-32 (2)	1" (2)	(2)	(2)
W-73	W-73
Control	Control Holder

CONTROL BRACKET INSTALLATION

SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with

an isolating wall control/switch. CAUTION! Do not use with wall dimmer.

Step 14 Follow instructions for the type of transmitter control bracket you will be using.

Standard
Toggle		Rocker
Switch		Light
		Switch
Inner
mounting	Outer
holes	mounting
	holes
Switch
Cover		Switch
Plate		Cover
Control	Control	Plate
Bracket	Bracket

Standard Light Switch

Step A. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step B. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step C. Insert and tighten the screws using the provided screwdriver.

Wall Installation

Step A. Locate a 2x4 wall stud in a convenient location.

Step B. Orient the control bracket as shown over the 2x4 stud.

Step C. Insert the 1" wood screws in either the inner or outer mounting holes and tighten using the provided screwdriver.

Rocker Light Switch

Step A. Break off the two tabs by pushing outward.

Step B. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step C. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step D. Insert and tighten the screws using the provided screwdriver.

NOTE: The wall anchors and 6-32 x 1" screws may be used in situations where mounting to a stud is not possible. Use the inner mounting holes. After securing the anchor, discard the anchor’s pointed screws and use the 6-32 decor ovalhead screws supplied.

Anchor
Panhead
Screw	Drywall Anchor
Wood	Decor Ovalhead Screw
Screw 1"
	6-32 X 1"

10