Casio 130CR 4. Basic Programming for QUICK START

Part-1 QUICK START OPERATION

4. Basic Programming for QUICK START	Mode Switch
	REG	CAL
	OFF	X
	RF	Z

PGM

1-Part

Procedure	Purpose
1. Turn the mode switch to PGM position.	Programming

2.Press the following keys to set the current time. Example: 13:18 PM = 1318

		Zo P appears in mode display			Setting the current
ZCZ<h
					time
			y	(to end the time setting)
	Time	Minutes

•Enter 4 digits

•24-hour time format

3.Press the following keys to set the current date. Example: January 8, 2005 = 050108

			Zo P appears in mode display		Setting the current
					date
?B?Z?<h
				y (to end the date setting)
	Year	Month Day

•Enter 6 digits

•Enter last 2 digits for year set. (2006 → 06)

4.You can set only one tax calculation system – either an add-on or an add-in depending on the laws in your area. Press the following keys to set the tax rate.

Example: Set tax rate 1 as 5.25% and tax rate 2 as 10%.

Co P3 appears in mode display
?ZXBo Program set code No. for tax rate 1
B"XBp	Setting the Tax rate
	5.25% tax rate
B??Cp	50 for Round off and 03 for VAT (Value Added Tax)
o	– Add In
?XXBo Program set code No. for tax rate 2
Z?p	10% tax rate
B??Cp – Add In
	50 for Round off and 03 for VAT (Value Added Tax)

o(to end the setting)

•See page 26 to specify the tax system and rounding for details.

5. Press the following keys to preset tax status of departments.
Tax status for the Departments are fixed as Non-taxable.
Example: Set Departments 1 and 2 as taxable status 1.	Setting the status of
Zo P appears in mode display	Departments
.aso
• See page 19 to change the fixed tax status.

E

11