Part 4 | USEFUL INFORMATION |
1.Troubleshooting
| Symptom/Problem | Most common causes | Solutions |
|
|
|
|
1 | E01 appears on the display. | Changing modes without completing transaction. | Return key to where it stops buzzing and |
|
|
| press p. |
|
|
|
|
2 | E94 appears on the display. | Printer paper is jammed. | Remove jammed paper. Turn Mode |
|
|
| switch to OFF then turn to ON, or Turn |
|
|
| power OFF and then turn power ON. |
|
|
|
|
3 | No date or time on receipt. | Printer is programmed as a journal. | Program printer to print receipts. |
| Paper is not advancing enough. |
|
|
|
|
|
|
4 | Key won’t turn to Z, X, PGM and RF modes. | Using OP key. | Use the PGM key. |
|
|
|
|
5 | Drawer opens up after ringing up only one | Department is programmed as a single item dept. | Program the dept. as a normal dept. |
| time. |
|
|
|
|
|
|
6 | Not clearing totals at end of day after taking | Using X mode to take out reports. | Use Z mode to take out reports. |
| report. |
|
|
|
|
|
|
7 | Programming is lost whenever register is | Bad or no batteries. | Put in new batteries. |
| unplugged or there is a power outage. |
|
|
|
|
|
|
8 | Register is inoperative. | No power. | Pull lever underneath register at rear. |
| Can’t get money out of drawer. |
|
|
|
|
|
|
When the cash drawer does not open!
In case of power failure or the machine is in malfunction, the cash drawer does not open automati- cally. Even in these cases, you can open the cash drawer by pulling drawer release lever (see below).
Important!
The drawer will not open, if it is locked with a drawer lock key.30