USER’S GUIDE 2471
To turn on the backlight manually
In any mode, press L to illuminate the display for about two seconds.
•The above operation turns on the backlight regardless of the current auto light switch setting.
About the Auto Light Switch
Turning on the auto light switch causes the backlight to turn on for about two seconds, whenever you position your wrist as described below in any mode. Note that this watch features a “Full Auto EL Light,” so the auto light switch operates only when available light is below a certain level. It does not turn on the backlight under bright light.
Moving the watch to a position that is parallel to the ground and then tilting it towards you more than 40 degrees causes the backlight to turn on.
Parallel to | More than | |
ground | ||
40° |
Warning!
•Always make sure you are in a safe place whenever you are reading the display of the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not surprise or distract others around you.
•When you are wearing the watch, make sure that its auto light switch is turned off before riding on a bicycle or operating a motorcycle or any other motor vehicle. Sudden and unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury.
To turn the auto light switch on and off
In the Timekeeping Mode, hold down C for about one second to toggle the
auto light switch on ( | displayed) or off ( | not displayed). |
•Pressing C while in the Timekeeping Mode changes to the Barometer/ Thermometer Mode, but keep C depressed for about one second to turn the auto light switch on or off. After that, you can return to the Timekeeping Mode by pressing D.
•The auto light switch on indicator (
) is on the display in all modes while the auto light switch is turned on.
Questions & Answers
Question: What causes incorrect direction readings?
Answer:
•Incorrect bidirectional calibration. Perform bidirectional calibration.
•Nearby source of strong magnetism, such as a household appliance, a large steel bridge, a steel beam, overhead wires, etc., or an attempt to perform direction measurement on a train, boat, etc. Move away from large metal objects and try again. Note that digital compass operation cannot be performed inside a train, boat, etc.
Question: What causes different direction readings to produce different results at the same location ?
Answer: Magnetism generated by nearby
Question: Why am I having problems taking direction readings indoors ?
Answer: A TV, personal computer, speakers, or some other object is interfering with terrestrial magnetism readings. Move away from the object causing the interference or take the direction reading outdoors. Indoor taking direction readings are particularly difficult inside
Question: How does the altimeter work?
Answer: Generally, air pressure and temperature decrease as altitude increases. This watch bases its altitude measurements on International Standard Atmosphere (ISA) values stipulated by the International Civil Aviation Organization (ICAO). These values define relationships between altitude, air pressure, and temperature.
Altitude |
| Air Pressure | Temperature | |||||
4000 m |
|
| 616 hPa/mb | About 8 hPa/mb per 100 m |
|
| ||
|
|
|
|
|
|
|
| |
3500 m |
| 701 hPa/mb |
|
|
| |||
3000 m |
| About 9 hPa/mb per 100 m |
| About 6.5°C | ||||
|
|
|
|
| ||||
2500 m |
|
|
|
|
| |||
795 hPa/mb |
|
| 2°C |
| per 1000 m | |||
2000 m |
| About 10 hPa/mb per 100 m |
| |||||
|
|
| ||||||
1500 m | 899 hPa/mb | About 11 hPa/mb per 100 m |
| 8.5°C |
| |||
1000 m |
|
| ||||||
500 m | 1013 hPa/mb | About 12 hPa/mb per 100 m |
| 15°C |
| |||
0 m |
|
|
| |||||
14000 ft | 19.03 inHg |
| 16.2°F |
| ||
12000 ft |
|
| About 0.15 inHg per 200 ft |
| ||
10000 ft | 22.23 inHg |
| 30.5°F |
| ||
8000 ft |
| About 0.17 inHg per 200 ft | About 3.6°F | |||
6000 ft | 25.84 inHg | About 0.192 inHg per 200 ft | 44.7°F | per 1000 ft | ||
4000 ft |
| |||||
2000 ft | 29.92 inHg | About 0.21 inHg per 200 ft | 59.0°F |
| ||
0 ft |
|
| ||||
Source: International Civil Aviation Organization
•Note that the following conditions will prevent you from obtaining accurate readings:
When air pressure changes because of changes in the weather Extreme temperature changes
When the watch itself is subjected to strong impact
There are two standard methods of expressing altitude: Absolute altitude and relative altitude. Absolute altitude expresses an absolute height above sea level. Relative altitude expresses the difference between the height of two different places.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Height of building 130 m |
| Rooftop at an altitude of | |||||||||
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
| 230 m above sea level | ||||||||||
|
|
|
|
|
|
| (Relative altitude) |
| ||||||||||
|
|
|
|
|
|
|
| (Altitude above sea | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| level) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sea
Precautions Concerning Simultaneous Measurement of Altitude and Temperature
Though you can perform altitude and temperature measurements at the same time, you should remember that each of these measurements require different conditions for best results. With temperature measurement, it is best to remove the watch from your wrist in order to eliminate the effects of body heat. In the case of altitude measurement, on the other hand, it is better to leave the watch on your wrist, because doing so keeps the watch at a constant temperature, which contributes to more accurate altitude measurements.
The following describes what you should do to give priority to either altitude or temperature.
•To give altitude measurement priority, leave the watch on your wrist or in any other location where the temperature of the watch is kept constant.
•To give temperature measurement priority, remove the watch from your wrist and allow it to hand freely from your bag or in another location where it is not exposed to direct sunlight. Note that removing the watch from your wrist can momentarily affect pressure sensor readings.
Question: How does the barometer work?
Answer: Barometric pressure indicates changes in the atmosphere, and by monitoring these changes you can predict the weather with reasonable accuracy. Rising atmospheric pressure indicates good weather, while falling pressure indicates deterioration weather conditions.
The barometric pressures that you see in the newspaper and on the TV weather report are measurements corrected to values measured at 0 m sea level.
Battery
This watch is equipped with a solar cell and a
Solar cell panelrechargeable battery (secondary battery) that is charged by the electrical power produced by the solar cell.
Important!
•Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause rechargeable battery power to run down. Be sure that the watch is normally exposed to bright light whenever possible.
5