Casio 2891 Using the Timer, Timer Types, Timer Alarms, ❚To configure timer settings, ❚Progress Beeper, ❚Time Up Alarm, ❚To turn the progress beeper on or off

Operation Guide 2891

Using the Timer	“Modes and Display Screens”.
	Use the Dbutton to enter the Timer Mode as shown under

❚To configure timer settings

You can set the start time of the timer in units of one minute in the range of 1 to 60 minutes. The watch beeps for 5 seconds when the end of the countdown is reached. Turning on the watch’s auto repeat timer feature causes the countdown to restart from the start time whenever the end of the countdown is reached.

Timer Types

Timer Alarms

❚Progress Beeper

When the progress beeper is turned on, the watch beeps at the top of minute 10, 5, 4, 3, 2, and 1 before the end of countdown is reached, and at second 50, 40, 30, 20, 10, 5, 4, 3, 2, and 1 of the final minute.

Minutes (2 seconds)

3. Press the D button to change to the timer type setting.

There are two different settings that you can use to configure the timer as describe below.

•If the timer start time is less than 10 minutes, the progress beeper beeps only for the minutes and seconds that are actually counted down.

4. Press the C button to toggle the timer type

Indicates

auto repeat timer

•Repeat Timer

With the Repeat Timer, the countdown stops, the original start time appears, and the watch beeps for 5 seconds when the end of the countdown is reached.

•The “” indicator appears on the display while the Repeat Timer is selected.

•Auto Repeat Timer

The Auto Repeat Time causes timing to restart from the start time when the end of the countdown is reached.

•The “” indicator appears on the display while the Auto Repeat Timer is selected.

•The countdown repeats up to 10 times, or until you stop it manually.

•See “To turn the progress beeper on or off” for information about

how to turn the progress beeper on and off. The “” indicator is on the display while the progress beeper is turned on.

❚Time Up Alarm

The watch beeps for five seconds when the end of the countdown is reached.

•Pressing any button while the beeper is sounding stops it.

1. While the current starting time is displayed in the Timer Mode, hold down the E button for about two seconds until the start to flash on the display. This is the setting screen.

2. Press the C(+) and A (–) buttons to change the minutes setting.

•Holding down either button scrolls the setting at high speed.

(–)between repeat timer and

auto repeat timer.

•The “” indicator appears on the display while the Auto Repeat Timer is selected.

(+)

5. When the setting is the way you want, press the E button to exit the setting screen and return to the timer mode screen.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

❚To turn the progress beeper on or off

In the Timer Mode (countdown can be running or stopped), press the Abutton to toggle the progress beeper on and off.

•The “” indicator is on the display while the progress beeper is turned on.

Indicates progress beeper on

❚To use the countdown timer

In the Timer Mode, press the C button to start and stop the countdown.

•The time counts down in 1-second steps. (Reset)

Minutes

Seconds

(Start/Stop)

Current Time

•Pressing the Abutton while the countdown is stopped resets to the countdown start time.

•Pressing the Cbutton while the timer countdown is stopped restarts the countdown.

16