2 Using the ClassPad Add-In Installer

9. Tap [OK].

10. On the ClassPad Add-In Installer window, click .

• After a connection is successfully established between your ClassPad and computer, the “ClassPad - Not connected” on the left pane will be replaced by the add-in applications that are currently installed on your ClassPad.

11. Click “Application” in the left pane.

•This causes the add-in applications currently installed on your ClassPad to appear in the right pane. If the right pane remains blank, it means your ClassPad does not have any add-in applications installed.

12. Drop the add-in software you want to use onto the right pane.

•This starts installation of the add-in.

•You can also use the following steps to install a single add-in application.

(1)On the ClassPad Add-In Installer window, click [Add-In] and then [Application].

(2)On the file selection window that appears, click the file you want to install.

(3)Click [Open] and then go to step 14.

13. Click the icon.

14. Click [OK].

E-8

20031201