Operation Guide 3040

Setting the Home City Time and Date

4. Press the Cbutton to display the summer time setting.
AT (AUTO)

This setting enables the auto summer time setting, which turns summer time on or off in accordance with the received

You can use the following procedure to set the current time and date of the Home City that you have selected in the Timekeeping Mode.

•Always use the Timekeeping Mode to set and adjust the current time and date settings.

•You can use the dual time screen to view the current time in two different time zones.

•You can also turn Power Saving on and off while setting the time and date.

❚To configure Home City settings

2. Press the Abutton so the Home City code flashes on the display. This is the setting screen.

3. Use the D(Eastward) and
B(Westward) buttons to
scroll through the city

City Code

(Westward)

5. Press the Dbutton to cycle through the summer time (DST) settings described below.

time calibration signal.

OFF

This setting turns off summer time, and displays the current time normally.

ON

This setting turns on summer time.

• Selecting this setting displays the DST indicator, and

advances the current time setting by one hour.

• Note that the above setting toggles between “OFF” and “ON”

when any city code other than those listed under “Reception

1. Make sure that the time whose settings you want to configure is selected as your Home Time.

•The Home Time is the time that appears on the Home Time screen. It is also the lower time on the Dual Time screen.

•To switch the positions of the Home Time and Secondary City time on the Dual Time screen, hold down the D button for about three seconds.

Secondary City Time

Home Time

codes until the one you
want to use as your Home
City is displayed.
• See “City Code List” for a
complete list of city codes.

• Holding either button scrolls

the setting at high speed.

(Eastward)

TYO = Tokyo

Ranges” is selected as the Home City.

6. Use the C button to move the flashing to the setting you want to change.

• Each press of Cmoves the flashing between the settings as shown below.

Home City

Summer Time

12/24-hour

Timekeeping

 

 

Power Saving

 

Seconds

7. Use the D (+) and B(–) buttons to change the currently selected setting.

•Use D(+) and B(–) to change the currently selected setting.

a.When the 12/24-hour timekeeping setting is selected

Press the Dbutton to toggle the

12/24-hour Timekeeping

timekeeping format between 12-hour

 

(“12H” indicator) and 24-hour (“24H”

 

indicator).

 

c. When the hour, minute, year, month, or day setting is

 

selected

Month Day Year

 

Press the Dbutton to increase the

 

selected setting or the Bbutton to

 

 

 

 

(–)

decrease it.

 

 

 

 

 

 

 

 

 

•Holding either button scrolls the

setting at high speed.

(+)

Minute Hour

d. When the Power Saving setting is selected Press the Dbutton to toggle Power

Saving ON and OFF.

• Turning on Power Saving causes

8. When all of the settings are the way you want, press the

Abutton to exit the setting screen.

•This exits the setting screen.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

Day

 

Month

 

Year

 

Minute

 

Hour

b. When the seconds setting is selected

 

 

 

 

 

 

 

Press the Dbutton to reset the

 

Resets to 00.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seconds to 00 in accordance with

 

 

 

 

 

 

 

 

 

 

 

 

the time signal on the radio, TV, etc.

 

 

 

 

 

 

 

 

 

 

 

 

• Pressing the Dbutton while the

 

 

 

 

 

 

 

 

 

 

 

 

seconds count is in the range of

 

 

 

 

 

 

 

 

 

 

 

 

30 to 59 resets it to 00 and also

 

 

 

 

 

 

 

 

 

 

 

 

adds 1 to the minutes. Pressing

 

 

 

 

 

 

 

 

 

 

 

 

the Dbutton in the range of 00

 

 

 

 

 

 

 

 

 

 

 

 

to 29 resets the seconds count

 

 

 

 

 

 

 

 

 

 

 

 

without changing the minutes.

 

 

 

the Power Saving indicator to appear on the setting screen.

Repeat the above steps as many times as necessary to select each setting and change it as required.

•When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly when using 12-hour timekeeping, or that you specify the correct 24-hour time.

•You can set a year in the range of 00 (2000) to 99 (2099). The day of the week is set automatically in accordance with the date you set.

•The watch makes adjustments for leap years and month lengths automatically.

8