MA0612-EA

Operation Guide 3085

About This Manual

•Button operations are indicated using the letters shown in the illustration.

•Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

About the Display

•The display of the watch is divided into three areas: main (center), upper, and lower.

•You can select either of two settings for the main display area:

Regular (background/figure color combination same as the upper and lower display areas) or Reverse (background/figure color combination opposite that of the upper and lower display areas).

•The initial factory default setting for the main display area is “12H”, which switches between Regular and Reverse automatically every 12 hours.

•See “Main Display Area Style” for information about changing the main display area style.

Regular

Reverse

Upper Display Area
Main Display Area
Lower Display Area

General Guide

•Press Cto change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate the display.

Timekeeping Mode

World Time Mode

Alarm Mode

Press.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

•Pressing D in the Timekeeping Mode will toggle between the Time/Day screen and the Day/Time screen.

Time/Day Screen

Day/Time Screen

PM indicator
Hour : Minutes
Day of week
Day

 

 

Press .

 

Day of week

Day Seconds

PM indicator

Seconds

 

 

Hour : Minutes

Read this before you set the time and date !

The times displayed in the Timekeeping Mode and World Time Mode are linked. Because of this, make sure you select a city code for your Home City (the city where you normally use the watch) before you set the time and date.

•To view the current Home City code setting, press Awhile in the Timekeeping Mode.

•For full information on city codes, see the “City Code Table”.

To set the time and date

1.In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting screen.

2. Press Cto move the flashing in the sequence shown below to select other settings.

Seconds

 

 

 

City Code

 

 

DST

 

 

 

Hour

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Day

 

 

 

Month

 

 

Year

 

 

 

Minutes

 

 

 

 

 

•An icon appears momentarily on the display whenever you enter any mode besides the Timekeeping Mode.

Stopwatch Mode

Countdown Timer Mode

Edit Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.When the setting you want to change is flashing, use Dand Bto change it as described below.

Screen

To do this:

 

Do this:

 

Reset the seconds to

 

Press D.

 

Change the city code

 

Use D(east) and B(west).

 

Toggle between Daylight Saving Time (

)

Press D.

 

and Standard Time ( )

 

 

 

 

 

 

 

Change the hour or minutes

 

Use D(+) and B(–).

 

 

 

 

 

Change the year, month, or day

 

Use D(+) and B(–).

 

 

 

 

• See “Daylight Saving Time (DST)” for details about the DST setting.
4.Press Ato exit the setting screen.

• Resetting the seconds to while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to
without changing the minutes.
•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

•A leading zero is added to dates from 1 through 9.
Example: The 1st of the month is displayed as 01.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

DST indicator
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting

 

 

 

 

 

screen.

 

 

 

 

 

2. Press C twice to display the DST setting screen.

 

 

 

 

 

 

 

 

 

 

3. Press D to toggle between Daylight Saving Time ( )

 

 

 

 

 

 

 

 

 

 

and Standard Time ( ).

 

 

 

 

 

4. Press Ato exit the setting screen.

 

 

 

 

 

• The DST indicator is displayed on the Timekeeping

 

 

 

 

 

 

 

 

 

 

Mode and Alarm Mode screen while Daylight Saving

 

 

 

 

 

 

 

 

 

 

Time is turned on.

 

 

On/Off status

 

1