To calibrate the pressure sensor and the temperature sensor
| ll | ll | |
l | |||
l |
| l | |
ll |
|
| l |
l |
|
| |
| l | ||
lll |
| ||
|
| l |
|
|
| l | ll |
| |
| ll |
| |||
l |
|
| ll | ||
ll |
|
|
|
| l |
l |
|
|
| l | |
| l |
| l | ||
| l |
| |||
|
| llll |
|
| |
1.Press D to enter the Barometer/ Thermometer Mode (page
2.In the Barometer/Thermometer Mode, hold down A for about two seconds until either OFF or the current temperature calibration value starts to flash. This is the setting screen.
•If you want to calibrate the barometric pressure sensor, press D to move the flashing to the middle display area. This is the pressure sensor calibration screen.
3.Use E (+) and B
Temperature0.1°C
Barometric Pressure | 1 hPa |
•Pressing E and B at the same time returns to the factory calibration (OFF).
4.Press A to return to the Barometer/ Thermometer Mode screen.