Clearing the Historical Record
Use the following procedure to clear the contents of the historical record and restart all values from zero.
To clear the historical record
•Before trying to clear data, first check to make
sure that the Altimeter Mode stopwatch is stopped and reset to all zeros (page
1. Press the D button to enter the Data Recall Mode.
2. Hold down A.
•CLR will appear in the upper part of the display.
3.Keep Aheld down for an additional two seconds until CLR starts flashing.
• The historical record high altitude screen will reappear when data deletion
is complete.
• If you release the A button before CLR starts flashing in step 3, the watch will return to the historical record high altitude screen without deleting the data.