Operation Guide 3390

Using the Alarms and Hourly Time Signal

3. Use the D(+) and B (–) buttons to change the hour setting.

(Back)

5.

Use the D (+) and B

(Back)

 

(–)

 

 

buttons to change the

 

 

 

minute setting.

 

You can set the daily alarms in 1-minute increments. The watch beeps for 10 seconds when the current time in the Timekeeping Mode reaches the alarm time you set.

The Hourly Time signal causes the watch to beep every hour on the hour.

❚To display the alarm screen

In the Alarm Mode, press the Dbutton to toggle the display between the alarm screen and the Hourly Time Signal screen.

When you enter the Alarm Mode, the screen that was displayed when you last exited the mode appears first.

Alarm Screen

Hourly Time Signal Screen

❚To set the alarm time

1. In the Alarm Mode, press the Dbutton to display the alarm screen.

2. Hold down the Abutton for about two seconds.

•This will cause the hour digits

of the displayed alarm time to flash.

• Displaying the setting screen

Hour

automatically turns on the

 

alarm.

 

•Holding down either button changes the setting at high speed.

•When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly when using 12-hour timekeeping, or that you specify the correct 24-hour time.

•The same 12-hour/24-hour format you select for the Timekeeping Mode home time is also applied in the Alarm Mode.

4.Press the C button to select the minute setting.

•This causes the minute digits to flash.

•

Holding down either button

 

 

changes the setting at high

 

(Forward)

speed.

(Forward)

6.

When the setting is the way you want, press the A

 

button.

 

•This exits the setting screen.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

• Alarm off

• Hourly Time Signal off

Minutes

❚ To turn the alarm on or off

❚ To turn the hourly time signal on or off

1. In the Alarm Mode, use the D button to display the

1. In the Alarm Mode, use the Dbutton to display the

alarm screen.

Hourly Time Signal screen.

Configuring Home Time Settings

2. Press the Abutton to toggle the alarm

2. Press the Abutton to toggle the Hourly Time Signal on

on (“

” displayed) or off (“

” displayed).

(“

”) or off (“

”).

Alarm Off

Alarm On

Hourly Time Signal Off

Hourly Time Signal On

Alarm Time

❚To stop the alarm beeper

Press any button.

❚To test the alarm

In the Alarm Mode, hold down the D button to sound the alarm.

Home time settings include your Home City (the city where you will normally use the watch), the current time and date in your Home City, and other settings.

•Use the Timekeeping Mode to configure home time settings.

If you are planning to manually adjust both the digital and analog settings, be sure to adjust the digital setting first.

❚To configure home time settings

1. In the Timekeeping Mode, hold down the Abutton for about two seconds.

• This will cause the city code

 

currently selected as the

 

Home City to flash on the

City Code

display.

2.

Press the D button to

 

 

scroll through the city

 

 

codes until the one you

 

 

want to select is

 

 

displayed.

 

•

See the “World Time City

(Forward)

TYO=Tokyo

Code List” for information about city codes.

•Holding down either button scrolls at high speed.

3.When the city code you want is displayed, press the C button.

• This will display the summer time (DST) setting screen.

5