Operation Guide 3390

4. Press the D button to cycle through the available summer time (DST) settings until the one you want to select is displayed.

•AUTO

This setting enables the auto summer time setting, which turns summer time on or off in accordance with the received time calibration signal.

•

This setting uses Japan summer time data when TYO is

 

selected as the Home City, and U.S. summer time data

 

when NYC, CHI, DEN, or LAX is selected as the Home

 

City.

•

Note that “AUTO” can be selected only when TYO, LAX,

5. When the summer time setting is the way you want, use the C button to cycle the display through the settings shown below.

Home City

Summer Time

Code

 

Day

 

12/24-hour Timekeeping

Seconds

6. While the 12/24-hour timekeeping setting is flashing, press the D button to toggle between 12-hour (“12H”) and 24-hour (“24H”) timekeeping.

7. While the seconds are selected, press the D button to reset them to 00 in accordance with the time signal on the radio, TV, etc.

• Pressing the D button while

Indicates 12-hour or 24-hour timekeeping.

Seconds reset to 00.

8.

While the hour, minutes,

 

 

 

year, month, or day setting

 

 

 

is flashing, use the D (+)

 

 

 

button to change the

 

 

 

setting.

 

 

•

Holding down the D button

 

(Forward)

Hour

Minutes

 

changes the setting at high

 

 

 

speed.

Use the C button to select each of the settings and the

 

D button to change them.

•

When setting the hour, make sure you specify AM (no indicator) or

 

PM (P) correctly, or that you specify the correct 24-hour time.

•

You can set a year in the range of 2000 to 2099. The day of the

 

week is set automatically in accordance with the date you set.

DEN, CHI, or NYC is selected as the Home City.

• OFF

This setting turns off summer time and returns to normal timekeeping.

•ON

This setting turns on summer time and advances the current time by one hour. The DST indicator appears on the display when this setting is selected.

Month Year Minute Hour

the seconds count is in the

range of 30 to 59 resets it to

00 and also adds 1 to the

minutes. Pressing the D

button in the range of 00 to 29

resets the seconds count

without changing the minutes.

• Pressing the B button while

the seconds count is flashing

changes the face illumination

duration. See “Face

Ilumination” for more

information.

• The watch automatically makes adjustments for leap years and

month lengths.

9. When all of the settings are the way you want, press the

Abutton.

•This exits the setting screen.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

Digital-Analog Synchronization

After adjustment of the digital time, the watch automatically adjusts its analog setting to match.

•When adjusting the analog time, the hands move clockwise.

•Depending on how many hours different the digital and analog time settings are, it may take some time for the analog hand setting procedure to be finished.

Adjusting the Analog Time Setting

You can use the Hand Setting Mode to manually adjust the analog time when it does not match the digital time.

1. In the Hand Setting Mode, hold down the A button for about two seconds.

• This will cause the hour and minute setting of the digital time to flash on the display.

2. Use the D (+) button to adjust the hour and minute hands so they match the digital time.

• Each press of the Dbutton moves the hands 20 seconds

High-speed Lock

•While holding down the Dbutton to start high-speed clockwise movement of the hands, press the B button to lock the high-speed hand movement. You can then release the buttons.

•High-speed hand movement will continue until it completes a 12-hour cycle, or until you press any button to stop it.

•High-speed hand movement will also stop momentarily if an alarm starts to sound. High-speed movement will resume after the alarm stops.

3. When the setting is the way you want, press the A button.

•This exits the setting screen and automatically synchronizes the minute hand with the current seconds count.

•The display also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

clockwise.

(Forward)

•Holding down the Dbutton moves the hands at high speed.

6