Operation Guide 5114 5214

Thermometer:

Measurement and display range: –10.0 to 60.0°C (or 14.0 to 140.0°F)

Display unit: 0.1°C (or 0.2°F)

Measurement timing: Every five seconds in the Barometer/Thermometer Mode

Other: Calibration; Manual measurement (button operation)

Altimeter:

Measurement range: –700 to 10,000 m (or –2,300 to 32,800 ft.) without reference altitude

Display range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.)

Negative values can be caused by readings produced based on a reference altitude or due to atmospheric conditions.

Display unit: 5 m (or 20 ft.)

Current Altitude Data: 5-second intervals for 1 hour (0’05), or 5-second interval for first 3 minutes followed by 2-minute interval for next 10 hours (2’00)

Altitude Memory Data:

Manual save records: 14 (altitude, date, time)

Auto save values: High altitude (with month, day, time of reading), low altitude (with month, day, time of reading), cumulative ascent (with month, day, time of first reading), cumulative descent (with month, day, time of first reading)

Other: Reference altitude setting; Altitude graph; Altitude differential; Altitude auto measurement method (0’05 or 2’00)

Bearing Sensor Precision:

Direction: Within ±10°

Values are guaranteed for a temperature range of –10°C to 40°C (14°F to 104°F). North indicated by second hand: Error of ±2° for each mark in the scale.

E-104

Pressure Sensor Precision:

 

Conditions (Altitude)AltimeterBarometer

 

 

± (altitude differential × 2%

 

 

0 to 6000 m

+ 15 m) m

 

 

0 to 19680 ft.

± (altitude differential × 2%

± (pressure differential × 2%

Fixed

 

+ 50 ft.) ft.

+ 2 hPa) hPa

temperature

 

± (altitude differential × 2%

± (pressure differential × 2%

 

6000 to 10000 m

+ 25 m) m

+ 0.059 inHg) inHg

 

19680 to 32800 ft.

± (altitude differential × 2%

 

 

 

+ 90 ft.) ft.

 

Effect of

0 to 6000 m

± 50 m every 10°C

 

0 to 19680 ft.

± 170 ft. every 50°F

± 5 hPa every 10°C

variable

 

 

± 0.148 inHg every 50°F

6000 to 10000 m

± 70 m every 10°C

temperature

 

19680 to 32800 ft.

± 230 ft. every 50°F

 

•Values are guaranteed for a temperature range of –10°C to 40°C (14°F to 104°F).

•Precision is lessened by strong impact to either the watch or the sensor, and by temperature extremes.

Temperature Sensor Precision:

±2°C (±3.6°F) in range of –10°C to 60°C (14.0°F to 140.0°F)

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 59' 59.99"

Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:

Measuring unit: 1 second

Countdown start time setting range: 60 minutes (1-minute unit)

E-105

Alarms: 5 Daily alarms; Hourly time signal

World Time: 29 cities (29 time zones)

City Code Table

Other: Daylight Saving Time/Standard Time; Home City/World Time City switching

Illumination: LED (light-emitting diode); Selectable illumination duration (approximately 1.5 seconds or 3 seconds); Auto Light Switch on/off (Full Auto LED Light lights only in the dark)

Other: Battery power indicator; Power Saving; Low-temperature resistance (–10°C/14°F); Button operation tone on/off; Hand home position auto adjustment; Time Formats (12-hour and 24-hour)

Power Supply: Solar cell and one rechargeable battery

Approximate battery operating time: 5 months (from full charge to Level 4) under the following conditions:

•Watch not exposed to light

•Internal timekeeping

•Display on 18 hours per day, sleep state 6 hours per day

•1 illumination operation (1.5 seconds) per day

•10 seconds of alarm operation per day

•10 compass operations per week

•10 hours of altimeter measurement, once per month

•Barometric pressure readings and graph updating every two hours (12 times per day)

•4 minutes of signal reception per day

Frequent use of illumination runs down the battery. Particular care is required when using the auto light switch (page E-94).

E-106

City

 

City

UTC Offset/
Code

 

GMT Differential

 

 

PAGO PAGO

(PPG)

Pago Pago

–11

HONOLULU

(HNL)

Honolulu

–10

ANCHORAGE

(ANC)

Anchorage

–9

LOS ANGELES (LAX)

Los Angeles

–8

DENVER

(DEN)

Denver

–7

CHICAGO

(CHI)

Chicago

–6

NEW YORK

(NYC)

New York

–5

SANTIAGO

(SCL)

Santiago

–4

RIO

 

Rio De Janeiro

–3

PRAIA

(RAI)

Praia

–1

UTC

 

 

0

LONDON

(LON)

London

 

PARIS

(PAR)

Paris

+1

ATHENS

(ATH)

Athens

+2

JEDDAH

(JED)

Jeddah

+3

TEHRAN

(THR)

Tehran

+3.5

DUBAI

(DXB)

Dubai

+4

City

 

City

UTC Offset/

Code

 

GMT Differential

 

 

KABUL

(KBL)

Kabul

+4.5

KARACHI

(KHI)

Karachi

+5

DELHI

(DEL)

Delhi

+5.5

KATHMANDU

(KTM)

Kathmandu

+5.75

DHAKA

(DAC)

Dhaka

+6

YANGON

(RGN)

Yangon

+6.5

BANGKOK

(BKK)

Bangkok

+7

HONG KONG

(HKG)

Hong Kong

+8

TOKYO

(TYO)

Tokyo

+9

ADELAIDE

(ADL)

Adelaide

+9.5

SYDNEY

(SYD)

Sydney

+10

NOUMEA

(NOU)

Noumea

+11

WELLINGTON

(WLG)

Wellington

+12

•Based on data as of July 2010.

•The rules governing global times (GMT differential and UTC offset) and summer time are determined by each individual country.

L-1