Operation Guide 5114 5214
•The illustration below shows which buttons you need to press to navigate between modes.
•To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
•In any mode, press L to illuminate the display.
Timekeeping Mode| Countdown |
| Data Recall |
| Timer Mode | Stopwatch Mode | Mode |
| World Time |
| Hand Home Position |
| Alarm Mode | Mode | Receive Mode | Adjustment Mode |
•You can use buttons A, B, and C to enter a sensor mode directly from the Timekeeping Mode or from another sensor mode. To enter a sensor mode from the Data Recall, Stopwatch, Countdown Timer, Alarm, World Time, Receive, or Hand Home Position Adjustment Mode, first enter the Timekeeping Mode and then press the applicable button.
•The hour and minute hands indicate the current time in all modes. In the Timekeeping, Data Recall, Stopwatch, Countdown Timer, and Alarm modes, the second hand indicates the current (Timekeeping Mode) second. The second hand performs other operations in the other modes.
Sensor Modes| Compass Mode |
| Barometer/ |
| Altimeter Mode | ||||
| Thermometer Mode |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The functions and operations described in this section can be used in all of the modes.
Auto Return Features•The watch returns to the Timekeeping Mode automatically if you do not perform any button operation for two or three minutes in the Data Recall, Alarm, Receive, or Hand Home Position Adjustment Mode.
•If you leave a screen with flashing digits on the digital display for two or three minutes without performing any operation, the watch exits the setting screen automatically.
Initial ScreensWhen you enter the Data Recall, World Time, Alarm, Compass, or Barometer/Thermometer Mode, the data you were viewing when you last exited the mode appears first.
ScrollingThe A and C buttons are used to scroll through settings on the digital display while a setting screen is displayed, and to move the hands of the watch manually. In most cases, holding down either of these buttons will perform its operation at high speed.
Timekeeping
Use the Timekeeping Mode (HOME) to set and view the current time and date.
•In the Timekeeping Mode, press E to toggle the digital display between the day of the week and the barometric pressure graph.
Day of the WeekBarometric Pressure GraphSecond hand
Hour
hand
Minute hand
Month Day | Barometric | |
pressure graph | ||
|
Month Day | Day of week |
|
|
Configuring Home City Settings
There are two Home City settings: selecting the Home City, and specifying either standard time or daylight saving time (DST).
• The Auto DST (AUTO) setting will be available only when a city code that supports time calibration |
signal reception (page |
setting is changed automatically in accordance with time calibration signal data. |
• Note that you cannot switch between standard time and daylight saving time (DST) while UTC is |
selected as your Home City. |
PM indicator
Hour : | Second |
Minutes | hand |
| City code |
| DST indicator |
1.In the Timekeeping Mode, hold down E until each of the following steps occurs.
•Hold SET appears on the digital display. ➝ HT flashes. ➝ Second hand points to the current Home City code.
•For information about city codes, see the “City Code Table” at the back of this manual.
2.To change the Home City code setting, press A to move the second hand clockwise.
•Keep pressing A until the second hand is pointing to the city code you want to select as your Home City.
•The current time in the time zone of the currently selected city code is shown on the digital display.
3.Press D. This will display the DST setting screen on the digital display.
4.Use A to cycle through the DST settings as shown below.
|
| Auto DST (AUTO) |
|
| DST off (OFF) |
| DST on (On) |
|
|
|
|
|
|
|
|
|
|
5. After all the settings are the way you want, press E to return to the Timekeeping Mode. |
• The hands of the watch will move the current time in the zone where the city code you selected as |
your Home City is located. Do not perform any operation on the watch while the hands are moving. |
• If Daylight Saving Time is selected, the dSt indicator will be on the digital display. |
Note
•After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the
•Selecting some city codes automatically makes it possible for the watch to receive the time calibration signal for the corresponding area. See page
1. | In the Timekeeping Mode, hold down E until each of the following |
DST indicator | steps occurs. |
| • Hold SET appears on the digital display. ➝ HT flashes. ➝ Second |
| hand points to the current Home City code. |
2. | Press D. This will display the DST setting screen on the digital |
Configuring Current Time and Date Settings Manually
You can configure current time and date settings manually when the watch is unable to receive a time calibration signal.
To change the current time and date settings manuallydisplay. |
|
|
3. Use A to cycle through the DST settings as shown below. | ||
Auto DST (AUTO) | DST off (OFF) | DST on (On) |
•The Auto DST (AUTO) setting can be selected only when a city code that supports time calibration signal reception (page
4.After all the settings are the way you want, press E to exit the setting screen.
•The dSt indicator indicates that Daylight Saving Time is selected.
PM indicator
Hour : | Second |
Minutes | hand |
| City code |
1.In the Timekeeping Mode, hold down E until each of the following steps occurs.
•Hold SET appears on the digital display. ➝ HT flashes. ➝ Second hand points to the current Home City code.
2.Use A to select the city code you want to select as your Home City.
•Each press of A moves the second hand clockwise. Keep pressing A until the second hand is pointed to the city code you want to select.
•Select your Home City code before changing any other setting.
•For full information about city codes, see the “City Code Table” at the back of this manual.