Operation Guide 5182
Setting Modes
The watch has a number of setting modes that you can use to confi gure its settings. In the Timekeeping Mode, hold down A until the setting mode you want is selected as described below. Release A when the setting mode you want is selected.
To select a setting mode
Hold down A.
x Second Hand moves to 12 o’clock. (3 seconds)
x Second Hand moves to 1 o’clock, indicating the Home City Setting Mode. See “To confi gure summer time and other Home City settings” (page
(3 seconds)
x Second Hand moves to 2 o’clock, indicating the Time Setting Mode. See “To change the current time setting” (page
(3 seconds)
x Second Hand moves to 3 o’clock, indicating the Home Position Adjustment Mode. See “To adjust home positions” (page
(3 seconds)
Watch returns to normal timekeeping.
ξ If the x Second Hand home position is off due to the watch having been subjected to strong magnetism or other abnormal treatment, the second hand may point to other positions than those described in the above procedure.
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the Timekeeping Mode from any other mode, hold down C at least two seconds.
| Hand Functions |
| z Hour Hand |
| x Second Hand |
| c Minute Hand |
v Left Dial Hand: Indicates TM. | |
| b Right Dial Hands: |
| Indicate the current time in the World Time City |
| (page |
n
Indicates the current
mDay
|
|
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST).
To configure summer time and other Home City settings
Note
ξ This watch does not have a city code that corresponds to Newfoundland.
1. Use A as shown under “Setting Modes” (page
ξ The watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes.
ξFor details about city codes, see the “City Code Table” at the back of this manual.
2.To change the Home City setting, press D to move the x Second Hand clockwise.
| ξ Press D as many times as necessary until the |
| x Second Hand is pointing at the city code you want |
| to select as your Home City. |
ξ Holding down D causes the x Second Hand to move | |
| at high speed. |
| ξ Each time you change the city code setting, the |
| z Hour Hand, c Minute Hand, n |
| m Day move to the current time and date for that city |
| code. Do not perform the next operation until these |
| hands stop moving. |
3.Press B to select STD (standard time) or DST (daylight saving time) for the currently selected city code.
ξWhile you are selecting the Home City code, the v Left Dial Hand will indicate the setting (STD, DST) of the currently selected city code.
− The following explains each of the available summer time settings.
|
|
STD | With this setting, the watch always indicates standard time. It does | |
not indicate summer time. | ||
| ||
|
| |
DST | With this setting, the watch advances its time setting by one hour | |
to indicate summer time (daylight saving time). | ||
|
ξNote that you cannot change the summer time setting while UTC is selected as your Home City.
4.After all the settings are the way you want, press A to return to the Timekeeping Mode.
Note
ξAfter you specify a city code, the watch will use UTC* offsets to calculate the World Time based on the current time in your Home City.
*Coordinated Universal Time, the
Configuring Current Time and Date Settings
You can confi gure current time and date settings.
To change the current time setting
1. Use A as shown under “Setting Modes” (page
ξ The x Second Hand will move to 12 o’clock. This is the time setting mode.
|
|
ξIn the following steps, each press of C cycles between settings as shown below.
Hour/Minute | Year (tens digit) | Year (ones digit) |
Day |
| Month |
2.Use D (+) and B
| ξ Each press of either button will move the hands |
| (z Hour Hand and c Minute Hand) one minute. |
| ξ Holding down D or B will start |
Hand and c Minute Hand movement in the applicable | |
| direction. To stop |
| any button. |
| ξ The n |
| with each other. |
|
ξWhen setting the time, make sure that the n
ξIf you want to change the date setting at this time, press C and perform the procedure starting from step 3 under “To change the current date setting” (page