Operation Guide 5182
3.After the time setting is the way you want, press A to return to regular timekeeping.
ξThis will cause the x Second Hand to move automatically to 12 o’clock and resume movement from there.
To change the current date setting
1. Use A as shown under “Setting Modes”
00(page
102. Press C.
ξThe x Second Hand will move to the tens digit of
| 20 | the current year setting. This is the year setting |
|
| mode. |
90 | 30 ξ The year can be set in the range of 2000 to 2099. |
80 40
7050
60
Setting the year (tens digit)
|
|
0
1
2
9 | 3 |
84
75
6
Setting the year (ones digit)
3.Press D to move the x Second Hand clockwise until it is pointing at the year tens digit you want to select.
4.After you select the year tens digit, press C.
ξThe x Second Hand will move to the ones digit of the current year.
5.Press D to move the x Second Hand clockwise until it is pointing at the year ones digit you want to select.
| Dec |
Nov | Jan |
Oct | Feb |
Sep | Mar |
Aug Apr
JulMay
Jun
Setting the month
6.After you select the year ones digit, press C.
ξThe x Second Hand will move to the currently selected month. This is the month setting mode.
7.Use D to move the x Second Hand to the month setting you want.
8.After the month setting is the way you want, press C.
ξThe x Second Hand will move to 12 o’clock, and the watch will enter the day setting mode.
|
|
9. Use D (+) and B |
ξ If you want to change the time setting at this time, |
press C and then perform the procedure starting |
from step 2 under “To change the current time setting” |
(page |
10. After the settings are the way you want, press A to |
return to regular timekeeping. |
ξ This will cause the x Second Hand to move |
Using the Stopwatch
The stopwatch measures elapsed time.
Hand Functions
x Second Hand: Indicates the stopwatch
v Left Dial Hand:
Note
automatically to 12 o’clock and resume movement |
from there. |
When you stop an elapsed time measurement operation, momentarily indicates: the
ξThe watch’s
bRight Dial Hands: Indicate the stopwatch minutes and seconds.
To perform elapsed time measurement
1.Use C to rotate the v Left Dial Hand until ST is located next to the pointer ( ).
ξThis indicates the Stopwatch Mode.
2.Now you can perform either of following stopwatch operations.
ξYou will not be able to perform any stopwatch operation while the hands are moving to their initial positions after you enter the Stopwatch Mode.
To perform an elapsed time operation |
|
|
| |||||
B |
| B |
| B |
| B |
| D |
|
|
|
| |||||
Start | Stop | (Restart) | (Stop) | Reset |
Note
ξThe Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.999 seconds.
ξIn the following cases, the hands of the watch are moving, so pressing D or B will not perform any stopwatch operation.
−While the hands are moving to elapsed timekeeping after you enter the Stopwatch Mode
−While the v Left Dial Hand is moving between
−While the watch is changing dates at midnight
ξOnce you start an elapsed time measurement operation, it continues until you press B to stop it or until 24 hours have elapsed (when it stops automatically). Timing continues even if you exit the Stopwatch Mode or if timing reaches the stopwatch limit defined above.
ξWhenever you enter the Stopwatch Mode, the hands of the watch move to their initial Stopwatch Mode positions. If you did not reset the stopwatch the last time you used it, the hands will return to the positions they were in the last time you exited the Stopwatch Mode.
|
|
ξThe x Second Hand (indicating 1/10 seconds) and v Left Dial Hand (indicating 1/100 seconds and 1/1000 seconds) move during the first 30 seconds after
an elapsed time measurement is started or restarted. When the measurement operation is stopped, they indicate timing results.
Example: When the measured elapsed time is 12 minutes, 34.452 seconds
1/100 seconds | 1/1000 seconds |
Elapsed Time Measurement Results
ξThe hands of the watch indicate the following information in the Stopwatch Mode: minutes, seconds, 1/10 seconds (page
ξWhenever you stop an elapsed time measurement operation, the v Left Dial Hand moves to indicate the following for two seconds each.
−(1) 1/100 seconds, (2) 1/1000 seconds, (3) Pointer ( ) The above cycle is performed twice.
−To repeat the above cycle, press A.
2 seconds | 2 seconds |