Operation Guide 5192

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST).

To configure Home City settingsNote

ξ This watch does not have a city code that corresponds to Newfoundland.

1. In the Timekeeping Mode, keep Adepressed (for about fi ve seconds) as the x Second Hand moves to the city code of the currently selected Home City.

ξ This is the city code setting mode.

ξThe watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes.

E-20

ξFor details about city codes, see the “City Code Table” at the back of this manual.

2.To change the Home City setting, press Dto move the x Second Hand clockwise.

ξ Keep pressing Duntil the x Second Hand is pointing at the city code you want to select as your Home City.

ξ Each time you change the city code setting, the

z Hour Hand, c Minute Hand, b 24-hour Hand and m Day move to the current time and date for that city code. Do not perform the next operation until these hands stop moving.

E-21

3.Press Bto toggle the time for the currently selected city code between STD (standard time)/DST (daylight saving time).

ξWhile you are selecting the Home City code, the v Left Dial Hand will indicate whether the currently selected city code is configured for standard time (STD) or daylight saving/summer time (DST).

ξNote that you cannot switch between STD (standard time)/DST (daylight saving time) while UTC is selected as your Home City.

4.After all the settings are the way you want, press Ato return to the Timekeeping Mode.

E-22

To toggle the Home City time between standard time and daylight saving time

1.Perform the step 3 under “To confi gure Home City settings” on page E-20.

ξEach time you select a city code, the z Hour Hand, c Minute Hand, and

b 24-hour Hand move to the current time for that city code. Do not perform the next operation until these hands stop moving.

ξWhile you are selecting the Home City code, the v Left Dial Hand will indicate whether the currently selected city code is configured for standard time (STD) or daylight saving/summer time (DST).

2.Press Bto toggle the time for the city code of the currently selected Home City between STD (standard time)/DST (daylight saving time).

ξNote that you cannot switch between STD (standard time)/DST (daylight saving time) while UTC is selected as your Home City.

3.After the setting is the way you want, press Ato return to the Timekeeping Mode.

E-23

Note

ξAfter you specify a city code, the watch will use UTC* offsets to calculate the World Time based on the current time in your Home City.

*Coordinated Universal Time, the world-wide scientific standard of timekeeping. The reference point for UTC is Greenwich, England.

Configuring Current Time and Date Settings

You can confi gure current time and date settings in the Timekeeping Mode.

To change the current time setting

1. In the Timekeeping Mode, keep Adepressed (for about fi ve seconds) as the x Second Hand moves to the city code of the currently selected Home City.

ξ The v Left Dial Hand will indicate whether the currently selected city code is configured for standard time (STD) or daylight saving/summer time (DST).

E-24

E-25

 

 

2.Change the Home City and daylight saving time (DST) settings, if you want.

ξFor details about these settings, see steps 2 and 3 under “To configure Home City settings” (page E-20).

ξIn the following steps, each press of Ccycles between settings as shown below.

3.

Press C.

 

ξ The x Second Hand will move to 12 o’clock. This is

 

the time setting mode.

4.

Use D(+) and B(–) to change the time (hour and

 

minute) setting.

Home city/DSTHour/Minute

Year

ξ Each press of either button will move the hands

(tens digit)

Year

(ones digit)

Day

Month

E-26

(z Hour Hand and c Minute Hand) one minute.

ξ Holding down Dor Bwill start high-speed z Hour

Hand and c Minute Hand movement in the applicable

direction. To stop high-speed hand movement, press

any button.

ξ The b 24-hour Hand and z Hour Hand move in sync

with each other.

ξ When setting the time, make sure that the b 24-hour

Hand indicates the proper a.m./p.m. hour.

E-27

ξIf you want to change the date setting at this time, press Cand perform the procedure starting from step 3 under “To change the current date setting” (page E-29).

5.After the time setting is the way you want, press Ato return to regular timekeeping.

ξThis will cause the x Second Hand to move automatically to 12 o’clock and resume movement from there.

To change the current date setting

1. In the Timekeeping Mode, keep Adepressed

00(for about fi ve seconds) as the x Second Hand

10moves to the city code of the currently selected

Home City.

20

2. Press Ctwice.

 

 

 

 

 

 

 

ξ The x Second Hand will move to the tens digit

90

 

 

 

 

30

of the current year setting. This is the year

 

 

 

 

 

 

 

setting mode.

80

 

40

ξ The year can be set in the range of 2000 to

 

2099.

 

 

 

 

 

 

 

70

 

50

 

 

 

 

 

 

60

 

 

 

Setting the year (tens digit)

E-28

E-29